Quoting Roja Rani Yarubandi (2021-05-12 01:22:20)
> If the hardware is still accessing memory after SMMU translation
> is disabled (as part of smmu shutdown callback), then the
> IOVAs (I/O virtual address) which it was using will go on the bus
> as the physical addresses which will result in unknown crashes
> like NoC/interconnect errors.
>
> So, implement shutdown callback for i2c driver to suspend the bus
> during system "reboot" or "shutdown".
>
> Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
> Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
> - As per Stephen's comments added seperate function for stop transfer,
> fixed minor nitpicks.
> - As per Stephen's comments, changed commit text.
>
> Changes in V3:
> - As per Stephen's comments, squashed patch 1 into patch 2, added Fixes tag.
> - As per Akash's comments, included FIFO case in stop_xfer, fixed minor nitpicks.
>
> Changes in V4:
> - As per Stephen's comments cleaned up geni_i2c_stop_xfer function,
> added dma_buf in geni_i2c_dev struct to call i2c_put_dma_safe_msg_buf()
> from other functions, removed "iova" check in geni_se_rx_dma_unprep()
> and geni_se_tx_dma_unprep() functions.
> - Added two helper functions geni_i2c_rx_one_msg_done() and
> geni_i2c_tx_one_msg_done() to unwrap the things after rx/tx FIFO/DMA
> transfers, so that the same can be used in geni_i2c_stop_xfer() function
> during shutdown callback. Updated commit text accordingly.
> - Checking whether it is tx/rx transfer using I2C_M_RD which is valid for both
> FIFO and DMA cases, so dropped DMA_RX_ACTIVE and DMA_TX_ACTIVE bit checking
>
> Changes in V5:
> - As per Stephen's comments, added spin_lock_irqsave & spin_unlock_irqsave in
> geni_i2c_stop_xfer() function.
>
> Changes in V6:
> - As per Stephen's comments, taken care of unsafe lock order in
> geni_i2c_stop_xfer().
> - Moved spin_lock/unlock to geni_i2c_rx_msg_cleanup() and
> geni_i2c_tx_msg_cleanup() functions.
>
> Changes in V7:
> - No changes
>
> Changes in V8:
> - As per Wolfram Sang comment, removed goto and modified geni_i2c_stop_xfer()
> accordingly.
>
> Changes in V9:
> - Fixed possbile race by protecting gi2c->cur and calling geni_i2c_abort_xfer()
> with adding another parameter to differentiate from which sequence is the
> geni_i2c_abort_xfer() called and handle the spin_lock/spin_unlock accordingly
> inside geni_i2c_abort_xfer(). For this added two macros ABORT_XFER and
> STOP_AND_ABORT_XFER.
> - Added a bool variable "stop_xfer" in geni_i2c_dev struct, used to put stop
> to upcoming geni_i2c_rx_one_msg() and geni_i2c_tx_one_msg() calls once we
> recieve the shutdown call.
> - Added gi2c->cur == NULL check in geni_i2c_irq() to not to process the irq
> even if any transfer is queued and shutdown to HW received.
>
> Changes in V10:
> - As per Stephen's comments, removed ongoing transfers flush and only
> suspending i2c bus in shutdown callback.
> - Also removed all other changes which have been made for ongoing transfers
> flush, handling race issues etc., during shutdown callback.
> - Updated commit text accordingly.
>
> drivers/i2c/busses/i2c-qcom-geni.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 214b4c913a13..277ab7e7dd51 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -650,6 +650,14 @@ static int geni_i2c_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static void geni_i2c_shutdown(struct platform_device *pdev)
> +{
> + struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
> +
> + if (!pm_runtime_status_suspended(gi2c->se.dev))
> + pm_runtime_set_suspended(gi2c->se.dev);
What was wrong with my suggested approach of telling i2c core that the
bus is suspended? This looks to do a bunch of work right before we're
shutting down, when it would be simpler to just mark the bus as
suspended and have it block future transactions and spit out a warning.
I do see that we should be marking it suspended/resumed during runtime
suspend/resume. I'm also confused if during system wide suspend/resume
we actually do anything in this driver. Is runtime suspend called for
system wide suspend?
----8<----
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c
b/drivers/i2c/busses/i2c-qcom-geni.c
index 214b4c913a13..ca12d348336b 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -656,6 +656,7 @@ static int __maybe_unused
geni_i2c_runtime_suspend(struct device *dev)
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
disable_irq(gi2c->irq);
+ i2c_mark_adapter_suspended(&gi2c->adap);
ret = geni_se_resources_off(&gi2c->se);
if (ret) {
enable_irq(gi2c->irq);
@@ -682,6 +683,7 @@ static int __maybe_unused
geni_i2c_runtime_resume(struct device *dev)
return ret;
enable_irq(gi2c->irq);
+ i2c_mark_adapter_resumed(&gi2c->adap);
gi2c->suspended = 0;
return 0;
}
