The PMI8994 has 4 multi-purpose-pins, add a compatible for this hardware
block to the MPP driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
PS. I see that while the related gpio driver was converted to hierarchical IRQ
chips the mpp driver didn't get the same treatment. We should fix this at some
point...
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt | 1 +
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
index 0ba07bc96c55..5363d44cbb74 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -21,6 +21,7 @@ of PMIC's from Qualcomm.
"qcom,pmi8950-mpp",
"qcom,pm8994-mpp",
"qcom,pma8084-mpp",
+ "qcom,pmi8994-mpp",
And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
if the device is on an spmi bus or an ssbi bus respectively.
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 3c213f799feb..2da9b5f68f3f 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -920,6 +920,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
{ .compatible = "qcom,pmi8950-mpp" }, /* 4 MPP's */
{ .compatible = "qcom,pm8994-mpp" }, /* 8 MPP's */
{ .compatible = "qcom,pma8084-mpp" }, /* 8 MPP's */
+ { .compatible = "qcom,pmi8994-mpp" }, /* 4 MPP's */
{ .compatible = "qcom,spmi-mpp" }, /* Generic */
{ },
};
--
2.29.2
