Re: [PATCH v7 1/5] usb: dwc3: host: Set PHY mode during suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> writes:
> During suspend read the status of all port and make sure the PHYs
> are in the correct mode based on current speed.
> Phy interrupt masks are set based on this mode. Keep track of the mode
> of the HS PHY to be able to configure wakeup properly.
>
> Also check during suspend if any wakeup capable devices are
> connected to the controller (directly or through hubs), if there
> are none set a flag to indicate that the PHY should be powered
> down during suspend.
>
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.h |  3 +++
>  drivers/usb/dwc3/host.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index b1e875c..cecd278 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1123,6 +1123,9 @@ struct dwc3 {
>  
>  	bool			phys_ready;
>  
> +	unsigned int            hs_phy_mode;
> +	bool			phy_power_off;
> +
>  	struct ulpi		*ulpi;
>  	bool			ulpi_ready;
>  
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index f29a264..527f04c 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -11,6 +11,14 @@
>  #include <linux/platform_device.h>
>  
>  #include "core.h"
> +#include "../host/xhci.h"
> +#include "../host/xhci-plat.h"
> +
> +static int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
> +
> +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
> +	.suspend_quirk = xhci_dwc3_suspend_quirk,
> +};

we're passing data using device_properties, why do you want this here?

> @@ -115,6 +123,13 @@ int dwc3_host_init(struct dwc3 *dwc)
>  		}
>  	}
>  
> +	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
> +			sizeof(struct xhci_plat_priv));
> +	if (ret) {
> +		dev_err(dwc->dev, "failed to add data to xHCI\n");
> +		goto err;
> +	}
> +
>  	ret = platform_device_add(xhci);
>  	if (ret) {
>  		dev_err(dwc->dev, "failed to register xHCI device\n");
> @@ -127,6 +142,50 @@ int dwc3_host_init(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> +static void dwc3_set_phy_mode(struct usb_hcd *hcd)
> +{
> +
> +	int i, num_ports;
> +	u32 reg;
> +	unsigned int ss_phy_mode = 0;
> +	struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
> +
> +	dwc->hs_phy_mode = 0;
> +
> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +	num_ports = HCS_MAX_PORTS(reg);

there's a big assumption here that xhci is still alive. Why isn't this
quirk implemented in xhci-plat itself?

> +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)

who calls this?

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux