Enable booting of Samsung Galaxy S III Neo mobile phone with MSM8226 SoC.
Implemented clocks are on top of MSM8974 GCC driver because there is really
little difference between them. UART serial communication is working.
Changes in v2:
- Removed alphabet sort includes in MSM8974 GCC driver
- Keep using qcom_cc_probe() function instead of qcom_cc_really_probe()
- Add only MSM8226 SoC related includes to qcom GCC clock bindings
- Changed DTS files license to BSD 3 Clause
- Made changes in qcom-msm8226.dtsi DTS file:
> Remove occurrences of clock-frequency property from timer nodes
> Removed model and compatible properties
> Renamed pin controller label to "tlmm"
> Moved compatible and reg properties first in the nodes
> Lowercase hex address values
> Fix make dtbs_check warning in memory node
Bartosz Dudziak (5):
dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
clk: qcom: gcc: Add support for Global Clock controller found on
MSM8226
arm: dts: qcom: Add support for MSM8226 SoC
dt-bindings: arm: qcom: Document MSM8226 SoC binding
arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
phone
.../devicetree/bindings/arm/qcom.yaml | 6 +
.../devicetree/bindings/clock/qcom,gcc.yaml | 5 +-
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++
arch/arm/boot/dts/qcom-msm8226.dtsi | 147 +++++++++++++++
drivers/clk/qcom/gcc-msm8974.c | 169 +++++++++++++++++-
6 files changed, 344 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi
--
2.25.1
