On Wed, Mar 31, 2021 at 12:39:09PM +0200, Loic Poulain wrote: > This change introduces initial support for a WWAN subsystem. Given the > complexity and heterogeneity of existing WWAN hardwares and interfaces, > there is no strict definition of what a WWAN device is and how it should > be represented. It's often a collection of multiple devices that perform > the global WWAN feature (netdev, tty, chardev, etc). > > One usual way to expose modem controls and configuration is via high > level protocols such as the well known AT command protocol, MBIM or > QMI. The USB modems started to expose that as character devices, and > user daemons such as ModemManager learnt how to deal with them. This > initial version adds the concept of WWAN port, which can be created > by any driver to expose one of these protocols. The WWAN core takes > care of the generic part, including character device creation and lets > the driver implementing access (fops) for the selected protocol. > > Since the different components/devices do no necesserarly know about > each others, and can be created/removed in different orders, the > WWAN core ensures that all WAN ports that contribute to the whole > WWAN feature are grouped under the same virtual WWAN device, relying > on the provided parent device (e.g. mhi controller, USB device). It's > a 'trick' I copied from Johannes's earlier WWAN subsystem proposal. > > This initial version is purposely minimalist, it's essentially moving > the generic part of the previously proposed mhi_wwan_ctrl driver inside > a common WWAN framework, but the implementation is open and flexible > enough to allow extension for further drivers. > > Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx> > --- > v2: update copyright (2021) > v3: Move driver to dedicated drivers/net/wwan directory > v4: Rework to use wwan framework instead of self cdev management > v5: Fix errors/typos in Kconfig > v6: - Move to new wwan interface, No need dedicated call to wwan_dev_create > - Cleanup code (remove legacy from mhi_uci, unused defines/vars...) > - Remove useless write_lock mutex > - Add mhi_wwan_wait_writable and mhi_wwan_wait_dlqueue_lock_irq helpers > - Rework locking > - Add MHI_WWAN_TX_FULL flag > - Add support for NONBLOCK read/write > > drivers/net/Kconfig | 2 + > drivers/net/Makefile | 1 + > drivers/net/wwan/Kconfig | 22 +++ > drivers/net/wwan/Makefile | 7 + > drivers/net/wwan/wwan_core.c | 317 +++++++++++++++++++++++++++++++++++++++++++ > include/linux/wwan.h | 73 ++++++++++ > 6 files changed, 422 insertions(+) > create mode 100644 drivers/net/wwan/Kconfig > create mode 100644 drivers/net/wwan/Makefile > create mode 100644 drivers/net/wwan/wwan_core.c > create mode 100644 include/linux/wwan.h > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 5895905..74dc8e24 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -502,6 +502,8 @@ source "drivers/net/wan/Kconfig" > > source "drivers/net/ieee802154/Kconfig" > > +source "drivers/net/wwan/Kconfig" > + > config XEN_NETDEV_FRONTEND > tristate "Xen network device frontend driver" > depends on XEN > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index 040e20b..7ffd2d0 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -68,6 +68,7 @@ obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o > obj-$(CONFIG_WAN) += wan/ > obj-$(CONFIG_WLAN) += wireless/ > obj-$(CONFIG_IEEE802154) += ieee802154/ > +obj-$(CONFIG_WWAN) += wwan/ > > obj-$(CONFIG_VMXNET3) += vmxnet3/ > obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o > diff --git a/drivers/net/wwan/Kconfig b/drivers/net/wwan/Kconfig > new file mode 100644 > index 0000000..545fe54 > --- /dev/null > +++ b/drivers/net/wwan/Kconfig > @@ -0,0 +1,22 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# Wireless WAN device configuration > +# > + > +menuconfig WWAN > + bool "Wireless WAN" > + help > + This section contains Wireless WAN driver configurations. > + > +if WWAN > + > +config WWAN_CORE > + tristate "WWAN Driver Core" > + help > + Say Y here if you want to use the WWAN driver core. This driver > + provides a common framework for WWAN drivers. > + > + To compile this driver as a module, choose M here: the module will be > + called wwan. > + > +endif # WWAN > diff --git a/drivers/net/wwan/Makefile b/drivers/net/wwan/Makefile > new file mode 100644 > index 0000000..934590b > --- /dev/null > +++ b/drivers/net/wwan/Makefile > @@ -0,0 +1,7 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# Makefile for the Linux WWAN device drivers. > +# > + > +obj-$(CONFIG_WWAN_CORE) += wwan.o > +wwan-objs += wwan_core.o > diff --git a/drivers/net/wwan/wwan_core.c b/drivers/net/wwan/wwan_core.c > new file mode 100644 > index 0000000..7d9e2643 > --- /dev/null > +++ b/drivers/net/wwan/wwan_core.c > @@ -0,0 +1,317 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* Copyright (c) 2021, Linaro Ltd <loic.poulain@xxxxxxxxxx> */ > + > +#include <linux/err.h> > +#include <linux/errno.h> > +#include <linux/fs.h> > +#include <linux/init.h> > +#include <linux/idr.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/types.h> > +#include <linux/wwan.h> > + > +#define WWAN_MAX_MINORS 256 /* Allow the whole available cdev range of minors */ That's not the "whole range of minors" at all... And what are you using this chardev for at all? All you have is an open() call, but you have nothing to do with it after that. What is it for? confused, greg k-h
