Re: [PATCH v5 3/7] phy: qcom-qmp: move DP functions to callbacks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 28 Mar 15:52 CDT 2021, Dmitry Baryshkov wrote:

> In preparation to adding support for V4 DP PHY move DP functions to
> callbacks at struct qmp_phy_cfg.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 438 +++++++++++++++-------------
>  1 file changed, 231 insertions(+), 207 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 9cdebe7f26cb..4150096fd350 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2268,6 +2268,8 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
>  	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
>  };
>  
> +struct qmp_phy;
> +
>  /* struct qmp_phy_cfg - per-PHY initialization config */
>  struct qmp_phy_cfg {
>  	/* phy-type - PCIE/UFS/USB */
> @@ -2307,6 +2309,12 @@ struct qmp_phy_cfg {
>  	const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
>  	int serdes_tbl_hbr3_num;
>  
> +	/* DP PHY callbacks */
> +	int (*configure_dp_phy)(struct qmp_phy *qphy);
> +	void (*configure_dp_tx)(struct qmp_phy *qphy);
> +	int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> +	void (*dp_aux_init)(struct qmp_phy *qphy);
> +
>  	/* clock ids to be requested */
>  	const char * const *clk_list;
>  	int num_clks;
> @@ -2423,6 +2431,216 @@ struct qcom_qmp {
>  	struct reset_control *ufs_reset;
>  };
>  
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> +	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> +	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> +	       qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> +	/* Turn on BIAS current for PHY/PLL */
> +	writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> +	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> +	       qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> +	writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> +	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> +	       DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> +	       DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> +	       DP_PHY_PD_CTL_DP_CLAMP_EN,
> +	       qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> +	writel(QSERDES_V3_COM_BIAS_EN |
> +	       QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> +	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> +	       QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> +	       qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> +	writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0);
> +	writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> +	writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> +	writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3);
> +	writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4);
> +	writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5);
> +	writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6);
> +	writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7);
> +	writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8);
> +	writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9);
> +	qphy->dp_aux_cfg = 0;
> +
> +	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> +	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> +	       PHY_AUX_REQ_ERR_MASK,
> +	       qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> +	{ 0x00, 0x0c, 0x14, 0x19 },
> +	{ 0x00, 0x0b, 0x12, 0xff },
> +	{ 0x00, 0x0b, 0xff, 0xff },
> +	{ 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> +	{ 0x08, 0x0f, 0x16, 0x1f },
> +	{ 0x11, 0x1e, 0x1f, 0xff },
> +	{ 0x19, 0x1f, 0xff, 0xff },
> +	{ 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> +	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> +	unsigned int v_level = 0, p_level = 0;
> +	u32 bias_en, drvr_en;
> +	u8 voltage_swing_cfg, pre_emphasis_cfg;
> +	int i;
> +
> +	for (i = 0; i < dp_opts->lanes; i++) {
> +		v_level = max(v_level, dp_opts->voltage[i]);
> +		p_level = max(p_level, dp_opts->pre[i]);
> +	}
> +
> +	if (dp_opts->lanes == 1) {
> +		bias_en = 0x3e;
> +		drvr_en = 0x13;
> +	} else {
> +		bias_en = 0x3f;
> +		drvr_en = 0x10;
> +	}
> +
> +	voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> +	pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> +
> +	/* TODO: Move check to config check */
> +	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> +		return;
> +
> +	/* Enable MUX to use Cursor values from these registers */
> +	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> +	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> +	writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
> +	writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> +	writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> +	writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> +
> +	writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> +	writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +	writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> +	writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> +	const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> +	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> +	u32 val, phy_vco_div, status;
> +	unsigned long pixel_freq;
> +
> +	val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> +	      DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> +	/*
> +	 * TODO: Assume orientation is CC1 for now and two lanes, need to
> +	 * use type-c connector to understand orientation and lanes.
> +	 *
> +	 * Otherwise val changes to be like below if this code understood
> +	 * the orientation of the type-c cable.
> +	 *
> +	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> +	 *	val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> +	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> +	 *	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> +	 * if (orientation == ORIENTATION_CC2)
> +	 *	writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> +	 */
> +	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> +	writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> +	writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> +	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> +	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> +	switch (dp_opts->link_rate) {
> +	case 1620:
> +		phy_vco_div = 0x1;
> +		pixel_freq = 1620000000UL / 2;
> +		break;
> +	case 2700:
> +		phy_vco_div = 0x1;
> +		pixel_freq = 2700000000UL / 2;
> +		break;
> +	case 5400:
> +		phy_vco_div = 0x2;
> +		pixel_freq = 5400000000UL / 4;
> +		break;
> +	case 8100:
> +		phy_vco_div = 0x0;
> +		pixel_freq = 8100000000UL / 6;
> +		break;
> +	default:
> +		/* Other link rates aren't supported */
> +		return -EINVAL;
> +	}
> +	writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> +	clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> +	clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> +	writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> +	writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +	writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +	writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> +	writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> +	if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> +			status,
> +			((status & BIT(0)) > 0),
> +			500,
> +			10000))
> +		return -ETIMEDOUT;
> +
> +	writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> +	if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> +			status,
> +			((status & BIT(1)) > 0),
> +			500,
> +			10000))
> +		return -ETIMEDOUT;
> +
> +	writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +	udelay(2000);
> +	writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> +	return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> +			status,
> +			((status & BIT(1)) > 0),
> +			500,
> +			10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> +	static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> +	u8 val;
> +
> +	qphy->dp_aux_cfg++;
> +	qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> +	val = cfg1_settings[qphy->dp_aux_cfg];
> +
> +	writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> +
> +	return 0;
> +}
> +
>  static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
>  {
>  	u32 reg;
> @@ -2871,6 +3089,11 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
>  
>  	.has_phy_dp_com_ctrl	= true,
>  	.is_dual_lane_phy	= true,
> +
> +	.dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> +	.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> +	.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> +	.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
>  };
>  
>  static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> @@ -3332,227 +3555,28 @@ static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
>  	return 0;
>  }
>  
> -static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> -{
> -	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> -	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> -	       qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> -	/* Turn on BIAS current for PHY/PLL */
> -	writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> -	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> -	       qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> -
> -	writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> -	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> -	       DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> -	       DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> -	       DP_PHY_PD_CTL_DP_CLAMP_EN,
> -	       qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> -	writel(QSERDES_V3_COM_BIAS_EN |
> -	       QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> -	       QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> -	       QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> -	       qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> -
> -	writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0);
> -	writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> -	writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> -	writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3);
> -	writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4);
> -	writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5);
> -	writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6);
> -	writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7);
> -	writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8);
> -	writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9);
> -	qphy->dp_aux_cfg = 0;
> -
> -	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> -	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> -	       PHY_AUX_REQ_ERR_MASK,
> -	       qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> -}
> -
> -static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> -	{ 0x00, 0x0c, 0x14, 0x19 },
> -	{ 0x00, 0x0b, 0x12, 0xff },
> -	{ 0x00, 0x0b, 0xff, 0xff },
> -	{ 0x04, 0xff, 0xff, 0xff }
> -};
> -
> -static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> -	{ 0x08, 0x0f, 0x16, 0x1f },
> -	{ 0x11, 0x1e, 0x1f, 0xff },
> -	{ 0x19, 0x1f, 0xff, 0xff },
> -	{ 0x1f, 0xff, 0xff, 0xff }
> -};
> -
> -static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> -{
> -	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> -	unsigned int v_level = 0, p_level = 0;
> -	u32 bias_en, drvr_en;
> -	u8 voltage_swing_cfg, pre_emphasis_cfg;
> -	int i;
> -
> -	for (i = 0; i < dp_opts->lanes; i++) {
> -		v_level = max(v_level, dp_opts->voltage[i]);
> -		p_level = max(p_level, dp_opts->pre[i]);
> -	}
> -
> -	if (dp_opts->lanes == 1) {
> -		bias_en = 0x3e;
> -		drvr_en = 0x13;
> -	} else {
> -		bias_en = 0x3f;
> -		drvr_en = 0x10;
> -	}
> -
> -	voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> -	pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> -
> -	/* TODO: Move check to config check */
> -	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> -		return;
> -
> -	/* Enable MUX to use Cursor values from these registers */
> -	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> -	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> -
> -	writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
> -	writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> -	writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> -	writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> -
> -	writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> -	writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> -	writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> -	writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> -}
> -
>  static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
>  {
>  	const struct phy_configure_opts_dp *dp_opts = &opts->dp;
>  	struct qmp_phy *qphy = phy_get_drvdata(phy);
> +	const struct qmp_phy_cfg *cfg = qphy->cfg;
>  
>  	memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
>  	if (qphy->dp_opts.set_voltages) {
> -		qcom_qmp_phy_configure_dp_tx(qphy);
> +		cfg->configure_dp_tx(qphy);
>  		qphy->dp_opts.set_voltages = 0;
>  	}
>  
>  	return 0;
>  }
>  
> -static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
> -{
> -	const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> -	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> -	u32 val, phy_vco_div, status;
> -	unsigned long pixel_freq;
> -
> -	val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> -	      DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> -
> -	/*
> -	 * TODO: Assume orientation is CC1 for now and two lanes, need to
> -	 * use type-c connector to understand orientation and lanes.
> -	 *
> -	 * Otherwise val changes to be like below if this code understood
> -	 * the orientation of the type-c cable.
> -	 *
> -	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> -	 *	val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> -	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> -	 *	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> -	 * if (orientation == ORIENTATION_CC2)
> -	 *	writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> -	 */
> -	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> -	writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> -	writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> -	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> -	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> -
> -	switch (dp_opts->link_rate) {
> -	case 1620:
> -		phy_vco_div = 0x1;
> -		pixel_freq = 1620000000UL / 2;
> -		break;
> -	case 2700:
> -		phy_vco_div = 0x1;
> -		pixel_freq = 2700000000UL / 2;
> -		break;
> -	case 5400:
> -		phy_vco_div = 0x2;
> -		pixel_freq = 5400000000UL / 4;
> -		break;
> -	case 8100:
> -		phy_vco_div = 0x0;
> -		pixel_freq = 8100000000UL / 6;
> -		break;
> -	default:
> -		/* Other link rates aren't supported */
> -		return -EINVAL;
> -	}
> -	writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> -
> -	clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> -	clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> -
> -	writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> -	writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -	writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -	writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -	writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> -	writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> -
> -	if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> -			status,
> -			((status & BIT(0)) > 0),
> -			500,
> -			10000))
> -		return -ETIMEDOUT;
> -
> -	writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> -	if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> -			status,
> -			((status & BIT(1)) > 0),
> -			500,
> -			10000))
> -		return -ETIMEDOUT;
> -
> -	writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -	udelay(2000);
> -	writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> -	return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> -			status,
> -			((status & BIT(1)) > 0),
> -			500,
> -			10000);
> -}
> -
> -/*
> - * We need to calibrate the aux setting here as many times
> - * as the caller tries
> - */
>  static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
>  {
>  	struct qmp_phy *qphy = phy_get_drvdata(phy);
> -	static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> -	u8 val;
> -
> -	qphy->dp_aux_cfg++;
> -	qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> -	val = cfg1_settings[qphy->dp_aux_cfg];
> +	const struct qmp_phy_cfg *cfg = qphy->cfg;
>  
> -	writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> +	if (cfg->calibrate_dp_phy)
> +		return cfg->calibrate_dp_phy(qphy);
>  
>  	return 0;
>  }
> @@ -3729,7 +3753,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
>  		return ret;
>  
>  	if (cfg->type == PHY_TYPE_DP)
> -		qcom_qmp_phy_dp_aux_init(qphy);
> +		cfg->dp_aux_init(qphy);
>  
>  	return 0;
>  }
> @@ -3783,7 +3807,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
>  
>  	/* Configure special DP tx tunings */
>  	if (cfg->type == PHY_TYPE_DP)
> -		qcom_qmp_phy_configure_dp_tx(qphy);
> +		cfg->configure_dp_tx(qphy);
>  
>  	qcom_qmp_phy_configure_lane(rx, cfg->regs,
>  				    cfg->rx_tbl, cfg->rx_tbl_num, 1);
> @@ -3802,7 +3826,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
>  
>  	/* Configure link rate, swing, etc. */
>  	if (cfg->type == PHY_TYPE_DP) {
> -		qcom_qmp_phy_configure_dp_phy(qphy);
> +		cfg->configure_dp_phy(qphy);
>  	} else {
>  		qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
>  		if (cfg->pcs_tbl_sec)
> -- 
> 2.30.2
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux