Re: [PATCH v3 3/8] extconn: Clean-up few drivers by using managed work init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Need to fix the work as following:
s/extconn/extcon

And I'd like you to use the more correct patch title like the following example:
"extcon: Use resource-managed function for delayed work"

Thanks,
Chanwoo Choi

On 3/23/21 10:57 PM, Matti Vaittinen wrote:
> Few drivers implement remove call-back only for ensuring a delayed
> work gets cancelled prior driver removal. Clean-up these by switching
> to use devm_delayed_work_autocancel() instead.
> 
> Additionally, this helps avoiding mixing devm and manual resource
> management and cleans up a (theoretical?) bug from extconn-palmas.c
> and extcon-qcom-spmi-misc.c where (devm managed)IRQ might schedule
> new work item after wq was cleaned at remove().
> 
> This change is compile-tested only. All testing is appreciated.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
> Changelog from RFCv2:
>  - RFC dropped. No functional changes.
> 
>  drivers/extcon/extcon-gpio.c           | 15 ++++-----------
>  drivers/extcon/extcon-intel-int3496.c  | 16 ++++------------
>  drivers/extcon/extcon-palmas.c         | 17 ++++++-----------
>  drivers/extcon/extcon-qcom-spmi-misc.c | 17 ++++++-----------
>  4 files changed, 20 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index c211222f5d0c..4105df74f2b0 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -9,6 +9,7 @@
>   * (originally switch class is supported)
>   */
>  
> +#include <linux/devm-helpers.h>
>  #include <linux/extcon-provider.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/init.h>
> @@ -112,7 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		return ret;
>  
> -	INIT_DELAYED_WORK(&data->work, gpio_extcon_work);
> +	ret = devm_delayed_work_autocancel(dev, &data->work, gpio_extcon_work);
> +	if (ret)
> +		return ret;

Need to add the error log as following:
	if (ret) {
		dev_err(dev, "Failed to initialize delayed_work");
		return ret;
	}	

>  
>  	/*
>  	 * Request the interrupt of gpio to detect whether external connector
> @@ -131,15 +134,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int gpio_extcon_remove(struct platform_device *pdev)
> -{
> -	struct gpio_extcon_data *data = platform_get_drvdata(pdev);
> -
> -	cancel_delayed_work_sync(&data->work);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int gpio_extcon_resume(struct device *dev)
>  {
> @@ -158,7 +152,6 @@ static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
>  
>  static struct platform_driver gpio_extcon_driver = {
>  	.probe		= gpio_extcon_probe,
> -	.remove		= gpio_extcon_remove,
>  	.driver		= {
>  		.name	= "extcon-gpio",
>  		.pm	= &gpio_extcon_pm_ops,
> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
> index 80c9abcc3f97..fb527c23639e 100644
> --- a/drivers/extcon/extcon-intel-int3496.c
> +++ b/drivers/extcon/extcon-intel-int3496.c
> @@ -11,6 +11,7 @@
>   */
>  
>  #include <linux/acpi.h>
> +#include <linux/devm-helpers.h>
>  #include <linux/extcon-provider.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
> @@ -101,7 +102,9 @@ static int int3496_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	data->dev = dev;
> -	INIT_DELAYED_WORK(&data->work, int3496_do_usb_id);
> +	ret = devm_delayed_work_autocancel(dev, &data->work, int3496_do_usb_id);
> +	if (ret)
> +		return ret;
>  
>  	data->gpio_usb_id = devm_gpiod_get(dev, "id", GPIOD_IN);
>  	if (IS_ERR(data->gpio_usb_id)) {
> @@ -155,16 +158,6 @@ static int int3496_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int int3496_remove(struct platform_device *pdev)
> -{
> -	struct int3496_data *data = platform_get_drvdata(pdev);
> -
> -	devm_free_irq(&pdev->dev, data->usb_id_irq, data);
> -	cancel_delayed_work_sync(&data->work);
> -
> -	return 0;
> -}
> -
>  static const struct acpi_device_id int3496_acpi_match[] = {
>  	{ "INT3496" },
>  	{ }
> @@ -177,7 +170,6 @@ static struct platform_driver int3496_driver = {
>  		.acpi_match_table = int3496_acpi_match,
>  	},
>  	.probe = int3496_probe,
> -	.remove = int3496_remove,
>  };
>  
>  module_platform_driver(int3496_driver);
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index a2852bcc5f0d..d2c1a8b89c08 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -9,6 +9,7 @@
>   * Author: Hema HK <hemahk@xxxxxx>
>   */
>  
> +#include <linux/devm-helpers.h>
>  #include <linux/module.h>
>  #include <linux/interrupt.h>
>  #include <linux/platform_device.h>
> @@ -237,7 +238,11 @@ static int palmas_usb_probe(struct platform_device *pdev)
>  			palmas_usb->sw_debounce_jiffies = msecs_to_jiffies(debounce);
>  	}
>  
> -	INIT_DELAYED_WORK(&palmas_usb->wq_detectid, palmas_gpio_id_detect);
> +	status = devm_delayed_work_autocancel(&pdev->dev,
> +					      &palmas_usb->wq_detectid,
> +					      palmas_gpio_id_detect);
> +	if (status)
> +		return status;
>  
>  	palmas->usb = palmas_usb;
>  	palmas_usb->palmas = palmas;
> @@ -359,15 +364,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int palmas_usb_remove(struct platform_device *pdev)
> -{
> -	struct palmas_usb *palmas_usb = platform_get_drvdata(pdev);
> -
> -	cancel_delayed_work_sync(&palmas_usb->wq_detectid);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int palmas_usb_suspend(struct device *dev)
>  {
> @@ -422,7 +418,6 @@ static const struct of_device_id of_palmas_match_tbl[] = {
>  
>  static struct platform_driver palmas_usb_driver = {
>  	.probe = palmas_usb_probe,
> -	.remove = palmas_usb_remove,
>  	.driver = {
>  		.name = "palmas-usb",
>  		.of_match_table = of_palmas_match_tbl,
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index 6b836ae62176..74d57d951b68 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -7,6 +7,7 @@
>   * Stephen Boyd <stephen.boyd@xxxxxxxxxx>
>   */
>  
> +#include <linux/devm-helpers.h>
>  #include <linux/extcon-provider.h>
>  #include <linux/init.h>
>  #include <linux/interrupt.h>
> @@ -80,7 +81,11 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  	}
>  
>  	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
> -	INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
> +
> +	ret = devm_delayed_work_autocancel(dev, &info->wq_detcable,
> +					   qcom_usb_extcon_detect_cable);
> +	if (ret)
> +		return ret;
>  
>  	info->irq = platform_get_irq_byname(pdev, "usb_id");
>  	if (info->irq < 0)
> @@ -105,15 +110,6 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static int qcom_usb_extcon_remove(struct platform_device *pdev)
> -{
> -	struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
> -
> -	cancel_delayed_work_sync(&info->wq_detcable);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int qcom_usb_extcon_suspend(struct device *dev)
>  {
> @@ -149,7 +145,6 @@ MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
>  
>  static struct platform_driver qcom_usb_extcon_driver = {
>  	.probe		= qcom_usb_extcon_probe,
> -	.remove		= qcom_usb_extcon_remove,
>  	.driver		= {
>  		.name	= "extcon-pm8941-misc",
>  		.pm	= &qcom_usb_extcon_pm_ops,
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux