Re: [v1] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 22, 2021 at 02:17:12AM -0700, Kalyan Thota wrote:
> From: Kalyan Thota <kalyant@xxxxxxxxxxxxxx>
> 
> DPU runtime resume will request for a min vote on the AXI bus as
> it is a necessary step before turning ON the AXI clock.
> 
> The change does below
> 1) Move the icc path set before requesting runtime get_sync.
> 2) remove the dependency of hw catalog for min ib vote
> as it is initialized at a later point.
> 
> Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>

Confirmed that this fixes a bunch of warnings at boot on SC7180 when
(out-of-tree) camera support is enabled:

  [    1.832228] gcc_disp_hf_axi_clk status stuck at 'off'
  [    2.118292] gcc_disp_hf_axi_clk status stuck at 'off'
  [    2.442383] gcc_disp_hf_axi_clk already disabled
  [    2.750054] gcc_disp_hf_axi_clk already unprepared
  [    3.154835] gcc_disp_hf_axi_clk already disabled
  [    3.421835] gcc_disp_hf_axi_clk already unprepared

Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux