This patchset convert msm8960 to reg_filed, use int_common instead of a custom function and fix wrong tsens get_temp function for msm8960. Ipq8064 SoCs tsens driver is based on 8960 tsens driver. Ipq8064 needs to be registered as a gcc child as the tsens regs on this platform are shared with the controller. This is based on work and code here https://git.linaro.org/people/amit.kucheria/kernel.git/log/?h=wrk3/tsens-8960-breakage v12: * Even more fix reported by Thara v11: * Address comments from Thara (thx) v10: * Fix wrong tsens init for ver_0 (crit_trips needs to be set in tsens_register) v9: * Fix warning from Documentation bot v8: * Drop MIN and MAX THRESH and use CRIT_THRESH instead * Fix broken documentation patch v7: * Rework calibrate function to use get_temp_common * Fix wrong required in the Documentation for ipq8064 * Fix hardware bug in sensor enable function v6: * Fix spelling error (can't find the problem with variable misallignment) * Rework big if-else * Remove extra comments * Add description about different interrupts v5: * Conver driver to use reg_fiedl * Use init_common * Drop custom set_trip and set_interrupt * Use common set_trip and set_interrupt * Fix bad get_temp function * Add missing hardcoded slope v4: * Fix compilation error and warning reported by the bot v3: * Change driver to register as child instead of use phandle v2: * Fix dt-bindings problems Ansuel Smith (9): drivers: thermal: tsens: Add VER_0 tsens version drivers: thermal: tsens: Don't hardcode sensor slope drivers: thermal: tsens: Convert msm8960 to reg_field drivers: thermal: tsens: Use init_common for msm8960 drivers: thermal: tsens: Fix bug in sensor enable for msm8960 drivers: thermal: tsens: Replace custom 8960 apis with generic apis drivers: thermal: tsens: Drop unused define for msm8960 drivers: thermal: tsens: Add support for ipq8064-tsens dt-bindings: thermal: tsens: Document ipq8064 bindings .../bindings/thermal/qcom-tsens.yaml | 56 ++++- drivers/thermal/qcom/tsens-8960.c | 233 +++++++++--------- drivers/thermal/qcom/tsens.c | 151 +++++++++--- drivers/thermal/qcom/tsens.h | 4 +- 4 files changed, 288 insertions(+), 156 deletions(-) -- 2.30.2
