From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
This moved from being trogdor specific to being part of the general
sc7180.dtsi SoC file in commit 681a607ad21a ("arm64: dts: qcom:
sc7180: Add DisplayPort HPD pin dt node"). Then we dropped the pinconf
from the general sc7180.dtsi file in commit 8d079bf20410 ("arm64: dts:
qcom: sc7180: Drop pinconf on dp_hot_plug_det") and added it back to
the trogdor dts file in commit f772081f4883 ("arm64: dts: qcom:
sc7180: Add "dp_hot_plug_det" pinconf for trogdor").
As part of this we managed to forget to drop the old copy in the
trogdor dts. Let's do it now.
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
[dianders: updated desc]
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Sorry for missing this in my last batch. I think my eyes glazed over
everything "dp" related as not-done-yet even though this one is easy
to do now.
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 436582279dad..192e2e424fde 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1155,20 +1155,6 @@ pinconf {
};
};
- dp_hot_plug_det: dp-hot-plug-det {
- pinmux {
- pins = "gpio117";
- function = "dp_hot";
- };
-
- config {
- pins = "gpio117";
- bias-disable;
- input-enable;
- drive-strength = <2>;
- };
- };
-
edp_brij_en: edp-brij-en {
pinmux {
pins = "gpio104";
--
2.31.0.rc2.261.g7f71774620-goog
