Re: [PATCH] gpiolib: acpi: support override broken GPIO number in ACPI table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 04, 2021 at 08:32:14PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 3/3/21 10:47 AM, Andy Shevchenko wrote:
> > On Fri, Feb 26, 2021 at 11:39:19AM +0800, Shawn Guo wrote:
> >> Running kernel with ACPI on Lenovo Flex 5G laptop, touchpad is just
> >> not working.  That's because the GpioInt number of TSC2 node in ACPI
> >> table is simply wrong, and the number even exceeds the maximum GPIO
> >> lines.  As the touchpad works fine with Windows on the same machine,
> >> presumably this is something Windows-ism.  Although it's obviously
> >> a specification violation, believe of that Microsoft will fix this in
> >> the near future is not really realistic.
> >>
> >> It adds the support of overriding broken GPIO number in ACPI table
> >> on particular machines, which are matched using DMI info.  Such
> >> mechanism for fixing up broken firmware and ACPI table is not uncommon
> >> in kernel.  And hopefully it can be useful for other machines that get
> >> broken GPIO number coded in ACPI table.
> > 
> > 
> > +Cc: Hans.
> > 
> > Hans, would appreciate your opinion on this thread. Maybe I'm mistaken in my
> > conclusions.
> 
> So I've read the entire thread here:
> https://lore.kernel.org/linux-gpio/20210226033919.8871-1-shawn.guo@xxxxxxxxxx/T/#u
> 
> And I agree wih Andy, this is not something which should be fixed up in the
> generic gpiolib-acpi code.
> 
> Note that we have similar things going on on x86 platforms. There are cases
> there where there are e.g. holes in the GPIO ranges advertised by the Intel
> pinctrl drivers. And in the beginning as i2c (and thus GpioIRQ) HID devices
> started to become more common there were also several rounds of work to make
> sure that the GPIO numbering (per ACPI-device / island) exported to the rest
> of the kernel (and thus to gpiolib-acpi) matched with the numbering which
> the ACPI tables expected (so the numbering which the Windows driver use).
> 
> It seems to me, esp. in the light that there are a lot of "crazy high" GPIO
> indexes in the DSDT of the Lenovo Flex 5G, that the right thing to do here
> is to fix the qualcom pinctrl/GPIO driver to number its GPIOs in the way
> expected by these ACPI tables. This will break use of existing devicetrees,
> so it will likely need to detect if the main firmware of the system is ACPI
> or DT based and then use 2 different numbering schemes depending on the
> outcome of that check.
> 
> Please also do not try ti fix this with some quirks in e.g. the i2c-hid driver,
> I will definitely NACK such attempts. From what we can see now any fix clearly
> should be done inside the qualcom GPIO driver.

Thanks for your opinion on this, Hans.  Yeah, with the information from
Jeffrey, I now agree with Andy that these high GPIO numbers are not
broken but have some meaning, and we should map them back to real GPIO
number in Qualcomm GPIO driver.

So we reach a consensus that this is not the right solution for Lenovo
Flex 5G. But what about for Andy's Galileo Gen 2 case, where the GPIO
number in ACPI is truly broken?

  ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")

Shawn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux