Quoting Rajendra Nayak (2021-03-03 04:17:56)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index fe4fdb9..aa6f847 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -239,6 +239,25 @@
> interrupt-controller;
> };
>
> + spmi_bus: spmi@c440000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0 0x0c440000 0 0x1100>,
> + <0 0x0c600000 0 0x2000000>,
> + <0 0x0e600000 0 0x100000>,
> + <0 0x0e700000 0 0xa0000>,
> + <0 0x0c40a000 0 0x26000>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
I see the binding says these should be 2 instead of 1 but I suspect that
is incorrect.
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + cell-index = <0>;
Is cell-index used? Please remove as I don't see it used anywhere and
not in the binding.
> + };
> +
> tlmm: pinctrl@f100000 {
> compatible = "qcom,sc7280-pinctrl";
> reg = <0 0x0f100000 0 0x1000000>;
