Add rpmhcc clock controller node for SC7280. Also add references to
rpmhcc clocks in gcc.
Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 21c2399..9bfa1e06 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -179,6 +180,14 @@
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sc7280";
reg = <0 0x00100000 0 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+ <0>, <0>, <0>, <0>, <0>, <0>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+ "pcie_0_pipe_clk", "pcie_1_pipe-clk",
+ "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
+ "ufs_phy_tx_symbol_0_clk",
+ "usb3_phy_wrapper_gcc_usb30_pipe_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -330,6 +339,13 @@
<SLEEP_TCS 3>,
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sc7280-rpmh-clk";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
