Fix the indentation, add pinctrl and move status="disabled"
down.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +++++++++++++++------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 75675fae0334..12afd49e0097 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2415,20 +2415,25 @@ sdhc1: sdhci@7464900 {
};
sdhc2: sdhci@74a4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+
+ bus-width = <4>;
+ status = "disabled";
};
blsp1_uart2: serial@7570000 {
--
2.30.1
