The trackpad interrupt got renamed and also moved to a new GPIO on
newer boards. Let's do the move in the "trogdor.dtsi" file and then
undo it in the two old boards.
NOTE: since none of the new boards have device trees yet, this change
looks silly on its own but it will make sense after more boards are
supported.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 16 ++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 14 ++++++++------
3 files changed, 38 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 89e5cd29ec09..11269522da50 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -58,8 +58,22 @@ ap_ts: touchscreen@10 {
};
};
+&trackpad {
+ interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+&trackpad_int_1v8_odl {
+ pinmux {
+ pins = "gpio58";
+ };
+
+ pinconf {
+ pins = "gpio58";
+ };
+};
+
&ts_reset_l {
pinconf {
/* This pin is not connected on -rev0, pull up to park. */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2cb522d6962e..bd2c783e0f2f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -68,6 +68,22 @@ &sdhc_2 {
status = "okay";
};
+&trackpad {
+ interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+ pinmux {
+ pins = "gpio58";
+ };
+
+ pinconf {
+ pins = "gpio58";
+ };
+};
+
/* PINCTRL - board-specific pinctrl */
&tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 25ab6572f9cf..4ad27b5c34d1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -642,14 +642,14 @@ ap_tp_i2c: &i2c7 {
status = "okay";
clock-frequency = <400000>;
- trackpad@15 {
+ trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int_1v8_odl>;
+ pinctrl-0 = <&tp_int_odl>;
interrupt-parent = <&tlmm>;
- interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&pp3300_fp_tp>;
@@ -1410,14 +1410,16 @@ pinconf-rx {
};
};
- trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+ /* Named trackpad_int_1v8_odl on earlier revision schematics */
+ trackpad_int_1v8_odl:
+ tp_int_odl: tp-int-odl {
pinmux {
- pins = "gpio58";
+ pins = "gpio0";
function = "gpio";
};
pinconf {
- pins = "gpio58";
+ pins = "gpio0";
/* Has external pullup */
bias-disable;
--
2.30.1.766.gb4fecdf3b7-goog
