Re: [PATCH v4 1/2] scsi: ufs: Enable power management for wlun

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/02/21 1:04 am, Asutosh Das wrote:
> During runtime-suspend of ufs host, the scsi devices are
> already suspended and so are the queues associated with them.
> But the ufs host sends SSU to wlun during its runtime-suspend.
> During the process blk_queue_enter checks if the queue is not in
> suspended state. If so, it waits for the queue to resume, and never
> comes out of it.
> The commit
> (d55d15a33: scsi: block: Do not accept any requests while suspended)
> adds the check if the queue is in suspended state in blk_queue_enter().
> 
> Call trace:
>  __switch_to+0x174/0x2c4
>  __schedule+0x478/0x764
>  schedule+0x9c/0xe0
>  blk_queue_enter+0x158/0x228
>  blk_mq_alloc_request+0x40/0xa4
>  blk_get_request+0x2c/0x70
>  __scsi_execute+0x60/0x1c4
>  ufshcd_set_dev_pwr_mode+0x124/0x1e4
>  ufshcd_suspend+0x208/0x83c
>  ufshcd_runtime_suspend+0x40/0x154
>  ufshcd_pltfrm_runtime_suspend+0x14/0x20
>  pm_generic_runtime_suspend+0x28/0x3c
>  __rpm_callback+0x80/0x2a4
>  rpm_suspend+0x308/0x614
>  rpm_idle+0x158/0x228
>  pm_runtime_work+0x84/0xac
>  process_one_work+0x1f0/0x470
>  worker_thread+0x26c/0x4c8
>  kthread+0x13c/0x320
>  ret_from_fork+0x10/0x18
> 
> Fix this by registering ufs device wlun as a scsi driver and
> registering it for block runtime-pm. Also make this as a
> supplier for all other luns. That way, this device wlun
> suspends after all the consumers and resumes after
> hba resumes.

Hi

I have a few more questions and comments.

At a glance it looked to me like the SCSI bus will leave a SCSI device
runtime suspended at system suspend, but UFS device spm_lvl and rpm_lvl need
not be the same.  Do you know how SCSI handles that case?

> 
> Co-developed-by: Can Guo <cang@xxxxxxxxxxxxxx>
> Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
> Signed-off-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
> ---
>  drivers/scsi/ufs/ufshcd.c  | 455 +++++++++++++++++++++++++++++++++++----------
>  drivers/scsi/ufs/ufshcd.h  |   4 +
>  include/trace/events/ufs.h |  20 ++
>  3 files changed, 382 insertions(+), 97 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 45624c7..1d8044a 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -16,6 +16,7 @@
>  #include <linux/bitfield.h>
>  #include <linux/blk-pm.h>
>  #include <linux/blkdev.h>
> +#include <scsi/scsi_driver.h>
>  #include "ufshcd.h"
>  #include "ufs_quirks.h"
>  #include "unipro.h"
> @@ -251,6 +252,11 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
>  static inline int ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
>  static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
>  static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba);
> +static int ufshcd_wl_runtime_suspend(struct device *dev);
> +static int ufshcd_wl_runtime_resume(struct device *dev);
> +static int ufshcd_wl_suspend(struct device *dev);
> +static int ufshcd_wl_resume(struct device *dev);
> +static void ufshcd_wl_shutdown(struct device *dev);
>  
>  static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
>  {
> @@ -1556,7 +1562,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>  	if (value == hba->clk_scaling.is_enabled)
>  		goto out;
>  
> -	pm_runtime_get_sync(hba->dev);
> +	scsi_autopm_get_device(hba->sdev_ufs_device);
>  	ufshcd_hold(hba, false);
>  
>  	hba->clk_scaling.is_enabled = value;
> @@ -1572,7 +1578,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>  	}
>  
>  	ufshcd_release(hba);
> -	pm_runtime_put_sync(hba->dev);
> +	scsi_autopm_put_device(hba->sdev_ufs_device);
>  out:
>  	up(&hba->host_sem);
>  	return err ? err : count;
> @@ -2572,6 +2578,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
>  	return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
>  }
>  
> +static inline bool is_rpmb_wlun(struct scsi_device *sdev)
> +{
> +	return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
> +}
> +
> +static inline bool is_device_wlun(struct scsi_device *sdev)
> +{
> +	return (sdev->lun ==
> +		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
> +}
> +
>  static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
>  {
>  	struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
> @@ -4808,6 +4825,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
>  }
>  
>  /**
> + * ufshcd_setup_links - associate link b/w device wlun and other luns
> + * @sdev: pointer to SCSI device
> + * @hba: pointer to ufs hba
> + */
> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
> +{
> +	struct device_link *link;
> +
> +	/*
> +	 * device wlun is the supplier & rest of the luns are consumers
> +	 * This ensures that device wlun suspends after all other luns.
> +	 */
> +	if (hba->sdev_ufs_device) {
> +		link = device_link_add(&sdev->sdev_gendev,
> +				       &hba->sdev_ufs_device->sdev_gendev,
> +				       DL_FLAG_PM_RUNTIME);
> +		if (!link) {
> +			dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
> +				dev_name(&hba->sdev_ufs_device->sdev_gendev));
> +			return;
> +		}
> +		hba->luns_avail--;
> +		/* Ignore REPORT_LUN wlun probing */
> +		if (hba->luns_avail != 1)
> +			return;
> +
> +		pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
> +		pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev);
> +	} else {
> +		/* device wlun is probed */
> +		hba->luns_avail--;
> +	}
> +}
> +
> +/**
>   * ufshcd_slave_alloc - handle initial SCSI device configurations
>   * @sdev: pointer to SCSI device
>   *
> @@ -4838,6 +4890,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
>  
>  	ufshcd_get_lu_power_on_wp_status(hba, sdev);
>  
> +	ufshcd_setup_links(hba, sdev);
> +
>  	return 0;
>  }
>  
> @@ -4984,16 +5038,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>  			 * solution could be to abort the system suspend if
>  			 * UFS device needs urgent BKOPs.
>  			 */
> -			if (!hba->pm_op_in_progress &&
> -			    ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
> -			    schedule_work(&hba->eeh_work)) {
> -				/*
> -				 * Prevent suspend once eeh_work is scheduled
> -				 * to avoid deadlock between ufshcd_suspend
> -				 * and exception event handler.
> -				 */
> -				pm_runtime_get_noresume(hba->dev);
> -			}
> +			if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
> +				/* Flushed in suspend */
> +				schedule_work(&hba->eeh_work);
>  			break;
>  		case UPIU_TRANSACTION_REJECT_UPIU:
>  			/* TODO: handle Reject UPIU Response */
> @@ -5589,8 +5636,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
>  	 * after a certain delay to recheck the threshold by next runtime
>  	 * suspend.
>  	 */
> -	pm_runtime_get_sync(hba->dev);
> -	pm_runtime_put_sync(hba->dev);
> +	scsi_autopm_get_device(hba->sdev_ufs_device);
> +	scsi_autopm_put_device(hba->sdev_ufs_device);
>  }
>  
>  /**
> @@ -5607,7 +5654,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>  	u32 status = 0;
>  	hba = container_of(work, struct ufs_hba, eeh_work);
>  
> -	pm_runtime_get_sync(hba->dev);
>  	ufshcd_scsi_block_requests(hba);
>  	err = ufshcd_get_ee_status(hba, &status);
>  	if (err) {
> @@ -5623,14 +5669,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>  
>  out:
>  	ufshcd_scsi_unblock_requests(hba);
> -	/*
> -	 * pm_runtime_get_noresume is called while scheduling
> -	 * eeh_work to avoid suspend racing with exception work.
> -	 * Hence decrement usage counter using pm_runtime_put_noidle
> -	 * to allow suspend on completion of exception event handler.
> -	 */
> -	pm_runtime_put_noidle(hba->dev);
> -	pm_runtime_put(hba->dev);
>  	return;
>  }
>  
> @@ -7254,6 +7292,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
>  		goto out;
>  	}
>  	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
> +	/*
> +	 * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime
> +	 * & would suspend the device-wlun upon timer expiry.
> +	 * But suspending device wlun _may_ put the ufs device in the pre-defined
> +	 * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then.
> +	 * Don't allow this suspend until all the luns have been probed.
> +	 * See pm_runtime_mark_last_busy in ufshcd_setup_links.
> +	 */
> +	pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
>  	scsi_device_put(hba->sdev_ufs_device);
>  
>  	hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
> @@ -7417,6 +7464,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
>  		goto out;
>  	}
>  
> +	hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] +
> +		desc_buf[DEVICE_DESC_PARAM_NUM_WLU];
> +
>  	ufs_fixup_device_setup(hba);
>  
>  	ufshcd_wb_probe(hba, desc_buf);
> @@ -7747,6 +7797,54 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
>  	return ret;
>  }
>  
> +static int ufshcd_wl_probe(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +
> +	/*
> +	 * Use this driver for both device wlun and rpmb lun
> +	 * It's used to send uac to rpmb wlun and ssu to device wlun
> +	 */
> +	if (sdev && (is_rpmb_wlun(sdev) || is_device_wlun(sdev)))
> +		return 0;
> +	return -ENODEV;
> +}
> +
> +static int ufshcd_wl_remove(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +
> +	scsi_remove_device(sdev);

The 'probe' did not do the __scsi_add_device(), so does the 'remove' need to
do scsi_remove_device()?

> +	return 0;
> +}
> +
> +static const struct dev_pm_ops ufshcd_wl_pm_ops = {
> +	SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_wl_suspend, ufshcd_wl_resume)

.poweroff needs to set the power mode to PowerDown irrespective of spm_lvl,
so not exactly the same as ufshcd_wl_suspend.

Also, ufshcd_pci_poweroff() in ufshcd-pci.c should be removed since it won't
work anymore.

> +};
> +
> +/**
> + * ufs_wlun - describes 2 wluns:
> + * ufs-device wlun - used to send pm commands
> + * and rpmb wlun - for rpmb commands
> + * All luns including rpmb are consumers of ufs-device wlun.
> + *
> + * Currently, no sd driver is present for wluns.
> + * Hence the no specific pm operations are performed.
> + * With ufs design, SSU should be sent to ufs-device wlun.
> + * Hence register a scsi driver for ufs wluns only.
> + */
> +static struct scsi_driver ufs_wlun = {
> +	.gendrv = {
> +		.name = "ufs_device_wlun",
> +		.owner = THIS_MODULE,
> +		.probe = ufshcd_wl_probe,
> +		.remove = ufshcd_wl_remove,
> +		.pm = &ufshcd_wl_pm_ops,
> +		.shutdown = ufshcd_wl_shutdown,
> +	},
> +};

WRT to RPMB, aren't all the callbacks optional, so that would leave only
something like below.  Would that work?

#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host)

static int ufs_rpmb_probe(struct device *dev)
{
    return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
}

static int ufs_rpmb_runtime_resume(struct device *dev)
{
    struct ufs_hba *hba = wlun_dev_to_hba(dev);

    if (hba->sdev_rpmb)
        return ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
    return 0;
}

static int ufs_rpmb_resume(struct device *dev)
{
    struct ufs_hba *hba = wlun_dev_to_hba(dev);

    if (hba->sdev_rpmb && !pm_runtime_suspended(dev))
        return ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
    return 0;
}

static const struct dev_pm_ops ufs_rpmb_pm_ops = {
    SET_RUNTIME_PM_OPS(NULL, ufs_rpmb_runtime_resume, NULL)
    SET_SYSTEM_SLEEP_PM_OPS(NULL, ufs_rpmb_resume)
};

static struct scsi_driver ufs_rpmb_template = {
    .gendrv = {
        .name = "ufs_rpmb_wlun",
        .owner = THIS_MODULE,
        .probe = ufs_rpmb_probe,
        .pm = &ufs_rpmb_pm_ops,
    },
};


> +
>  /**
>   * ufshcd_add_lus - probe and add UFS logical units
>   * @hba: per-adapter instance
> @@ -7755,6 +7853,12 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
>  {
>  	int ret;
>  
> +	ret = scsi_register_driver(&ufs_wlun.gendrv);

That will attempt to register the driver every time a UFS host controller is
added (e.g. what happens if you unbind and re-bind the host controller).
Probably needs to be in ufshcd_core_init() with corresponding unregister in
ufshcd_core_exit()

> +	if (ret) {
> +		dev_err(hba->dev, "Register device wlun driver failed: %d\n",
> +			ret);
> +		return ret;
> +	}
>  	/* Add required well known logical units to scsi mid layer */
>  	ret = ufshcd_scsi_add_wlus(hba);
>  	if (ret)
> @@ -7964,6 +8068,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
>  		pm_runtime_put_sync(hba->dev);
>  		ufshcd_hba_exit(hba);
>  	}
> +	hba->init_done = true;
>  }
>  
>  static const struct attribute_group *ufshcd_driver_groups[] = {
> @@ -8475,7 +8580,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>  	 * handling context.
>  	 */
>  	hba->host->eh_noresume = 1;
> -	ufshcd_clear_ua_wluns(hba);
> +	if (hba->wlun_dev_clr_ua)
> +		ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
>  
>  	cmd[4] = pwr_mode << 4;
>  
> @@ -8650,31 +8756,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
>  		ufshcd_setup_hba_vreg(hba, true);
>  }
>  
> -/**
> - * ufshcd_suspend - helper function for suspend operations
> - * @hba: per adapter instance
> - * @pm_op: desired low power operation type
> - *
> - * This function will try to put the UFS device and link into low power
> - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
> - * (System PM level).
> - *
> - * If this function is called during shutdown, it will make sure that
> - * both UFS device and UFS link is powered off.
> - *
> - * NOTE: UFS device & link must be active before we enter in this function.
> - *
> - * Returns 0 for success and non-zero for failure
> - */
> -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  {
>  	int ret = 0;
> -	int check_for_bkops;
>  	enum ufs_pm_level pm_lvl;
>  	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>  	enum uic_link_state req_link_state;
>  
> -	hba->pm_op_in_progress = 1;
> +	/*
> +	 * Is invoked when the device wlun is added to sysfs
> +	 * But by then hba->sdev_ufs_device may not be initialized.
> +	 */
> +	if (!hba->init_done)
> +		return 0;
>  	if (!ufshcd_is_shutdown_pm(pm_op)) {
>  		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
>  			 hba->rpm_lvl : hba->spm_lvl;
> @@ -8690,24 +8784,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  	 * just gate the clocks.
>  	 */
>  	ufshcd_hold(hba, false);
> -	hba->clk_gating.is_suspended = true;
>  
>  	if (ufshcd_is_clkscaling_supported(hba))
>  		ufshcd_clk_scaling_suspend(hba, true);
>  
>  	if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
>  			req_link_state == UIC_LINK_ACTIVE_STATE) {
> -		goto disable_clks;
> +		goto enable_scaling;
>  	}
>  
>  	if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
>  	    (req_link_state == hba->uic_link_state))
> -		goto enable_gating;
> +		goto enable_scaling;
>  
>  	/* UFS device & link must be active before we enter in this function */
>  	if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
>  		ret = -EINVAL;
> -		goto enable_gating;
> +		goto enable_scaling;
>  	}
>  
>  	if (ufshcd_is_runtime_pm(pm_op)) {
> @@ -8719,7 +8812,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  			 */
>  			ret = ufshcd_urgent_bkops(hba);
>  			if (ret)
> -				goto enable_gating;
> +				goto enable_scaling;
>  		} else {
>  			/* make sure that auto bkops is disabled */
>  			ufshcd_disable_auto_bkops(hba);
> @@ -8746,10 +8839,224 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  
>  		if (!hba->dev_info.b_rpm_dev_flush_capable) {
>  			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> -			if (ret)
> -				goto enable_gating;
> +			if (!ret)
> +				goto out;
>  		}
>  	}
> +enable_scaling:
> +	if (ufshcd_is_clkscaling_supported(hba))
> +		ufshcd_clk_scaling_suspend(hba, false);
> +
> +	hba->dev_info.b_rpm_dev_flush_capable = false;
> +out:
> +	if (hba->dev_info.b_rpm_dev_flush_capable) {
> +		schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
> +			msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
> +	}
> +	if (ret)
> +		ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret);
> +	ufshcd_release(hba);
> +	return ret;
> +}
> +
> +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +{
> +	int ret = 0;
> +
> +	if (!hba->init_done)
> +		return 0;
> +
> +	ufshcd_hold(hba, false);
> +	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
> +		/* The device is in DeepSleep but hba was not suspended */
> +		ret = ufshcd_reset_and_restore(hba);
> +		if (ret)
> +			goto out;
> +	}
> +
> +	if (!ufshcd_is_ufs_dev_active(hba)) {
> +		ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
> +		if (ret)
> +			goto out;
> +	}
> +
> +	if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
> +		ufshcd_enable_auto_bkops(hba);
> +	else
> +		/*
> +		 * If BKOPs operations are urgently needed at this moment then
> +		 * keep auto-bkops enabled or else disable it.
> +		 */
> +		ufshcd_urgent_bkops(hba);
> +
> +	if (hba->clk_scaling.is_allowed)
> +		ufshcd_resume_clkscaling(hba);
> +
> +	if (hba->dev_info.b_rpm_dev_flush_capable) {
> +		hba->dev_info.b_rpm_dev_flush_capable = false;
> +		cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
> +	}
> +
> +out:
> +	if (ret)
> +		ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
> +	ufshcd_release(hba);
> +	return ret;
> +}
> +
> +static int ufshcd_wl_runtime_suspend(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +	struct ufs_hba *hba;
> +	int ret;
> +	ktime_t start = ktime_get();
> +
> +	hba = shost_priv(sdev->host);
> +
> +	if (is_rpmb_wlun(sdev))
> +		return 0;
> +	ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM);
> +	if (ret)
> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> +	trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret,
> +		ktime_to_us(ktime_sub(ktime_get(), start)),
> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> +	return ret;
> +}
> +
> +static int ufshcd_wl_runtime_resume(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +	struct ufs_hba *hba;
> +	int ret;
> +	ktime_t start = ktime_get();
> +
> +	hba = shost_priv(sdev->host);
> +
> +	if (is_rpmb_wlun(sdev)) {
> +		if (hba->sdev_rpmb)
> +			return ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
> +		return 0;
> +	}
> +
> +	ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM);
> +	if (ret)
> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> +	trace_ufshcd_wl_runtime_resume(dev_name(dev), ret,
> +		ktime_to_us(ktime_sub(ktime_get(), start)),
> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> +	return ret;
> +}
> +
> +static int ufshcd_wl_suspend(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +	struct ufs_hba *hba;
> +	int ret;
> +	ktime_t start = ktime_get();
> +
> +	if (is_rpmb_wlun(sdev))
> +		return 0;
> +	hba = shost_priv(sdev->host);
> +	ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM);
> +	if (ret)
> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__,  ret);
> +
> +	trace_ufshcd_wl_suspend(dev_name(dev), ret,
> +		ktime_to_us(ktime_sub(ktime_get(), start)),
> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> +	return ret;
> +}
> +
> +static int ufshcd_wl_resume(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +	struct ufs_hba *hba;
> +	int ret;
> +	ktime_t start = ktime_get();
> +
> +	if (pm_runtime_suspended(dev))
> +		return 0;
> +	hba = shost_priv(sdev->host);
> +
> +	if (is_rpmb_wlun(sdev)) {
> +		if (hba->sdev_rpmb)
> +			return ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
> +		return 0;
> +	}
> +
> +	ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM);
> +	if (ret)
> +		dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> +	trace_ufshcd_wl_resume(dev_name(dev), ret,
> +		ktime_to_us(ktime_sub(ktime_get(), start)),
> +		hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> +	return ret;
> +}
> +
> +static void ufshcd_wl_shutdown(struct device *dev)
> +{
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +	struct ufs_hba *hba;
> +
> +	if (is_rpmb_wlun(sdev))
> +		return;
> +	hba = shost_priv(sdev->host);
> +	scsi_device_quiesce(sdev);
> +	shost_for_each_device(sdev, hba->host) {
> +		if (sdev == hba->sdev_ufs_device)
> +			continue;
> +		scsi_remove_device(sdev);

Shutdown needs to quiesce devices.  Removing devices is not advisable
because the upper layers cannot respond at this point, causing deadlocks.
Is scsi_remove_device() really needed here?

> +	}
> +	__ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
> +}
> +
> +/**
> + * ufshcd_suspend - helper function for suspend operations
> + * @hba: per adapter instance
> + * @pm_op: desired low power operation type
> + *
> + * This function will try to put the UFS link into low power
> + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
> + * (System PM level).
> + *
> + * If this function is called during shutdown, it will make sure that
> + * link is powered off.
> + *
> + * Returns 0 for success and non-zero for failure
> + */
> +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +{
> +	int ret = 0;
> +	int check_for_bkops;
> +	enum ufs_pm_level pm_lvl;
> +	enum ufs_dev_pwr_mode req_dev_pwr_mode;
> +	enum uic_link_state req_link_state;
> +
> +	hba->pm_op_in_progress = 1;
> +	if (!ufshcd_is_shutdown_pm(pm_op)) {
> +		pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
> +			 hba->rpm_lvl : hba->spm_lvl;
> +		req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
> +		req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
> +	} else {
> +		req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE;
> +		req_link_state = UIC_LINK_OFF_STATE;
> +	}
> +
> +	/*
> +	 * If we can't transition into any of the low power modes
> +	 * just gate the clocks.
> +	 */
> +	ufshcd_hold(hba, false);
> +	hba->clk_gating.is_suspended = true;
>  
>  	/*
>  	 * In the case of DeepSleep, the device is expected to remain powered
> @@ -8758,9 +9065,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  	check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
>  	ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
>  	if (ret)
> -		goto set_dev_active;
> +		goto enable_gating;
>  
> -disable_clks:
>  	/*
>  	 * Call vendor specific suspend callback. As these callbacks may access
>  	 * vendor specific host controller register space call them before the
> @@ -8790,7 +9096,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  	goto out;
>  
>  set_link_active:
> -	ufshcd_vreg_set_hpm(hba);
>  	/*
>  	 * Device hardware reset is required to exit DeepSleep. Also, for
>  	 * DeepSleep, the link is off so host reset and restore will be done
> @@ -8804,28 +9109,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  		ufshcd_set_link_active(hba);
>  	else if (ufshcd_is_link_off(hba))
>  		ufshcd_host_reset_and_restore(hba);
> -set_dev_active:
>  	/* Can also get here needing to exit DeepSleep */
>  	if (ufshcd_is_ufs_dev_deepsleep(hba)) {
>  		ufshcd_device_reset(hba);
>  		ufshcd_host_reset_and_restore(hba);
>  	}
> -	if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
> -		ufshcd_disable_auto_bkops(hba);
>  enable_gating:
> -	if (ufshcd_is_clkscaling_supported(hba))
> -		ufshcd_clk_scaling_suspend(hba, false);
> -
>  	hba->clk_gating.is_suspended = false;
> -	hba->dev_info.b_rpm_dev_flush_capable = false;
> -	ufshcd_clear_ua_wluns(hba);
>  	ufshcd_release(hba);
>  out:
> -	if (hba->dev_info.b_rpm_dev_flush_capable) {
> -		schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
> -			msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
> -	}
> -
>  	hba->pm_op_in_progress = 0;
>  
>  	if (ret)
> @@ -8846,10 +9138,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  {
>  	int ret;
> -	enum uic_link_state old_link_state;
>  
>  	hba->pm_op_in_progress = 1;
> -	old_link_state = hba->uic_link_state;
>  
>  	ufshcd_hba_vreg_set_hpm(hba);
>  	ret = ufshcd_vreg_set_hpm(hba);
> @@ -8901,43 +9191,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>  			goto vendor_suspend;
>  	}
>  
> -	if (!ufshcd_is_ufs_dev_active(hba)) {
> -		ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
> -		if (ret)
> -			goto set_old_link_state;
> -	}
> -
> -	if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
> -		ufshcd_enable_auto_bkops(hba);
> -	else
> -		/*
> -		 * If BKOPs operations are urgently needed at this moment then
> -		 * keep auto-bkops enabled or else disable it.
> -		 */
> -		ufshcd_urgent_bkops(hba);
> -
> -	hba->clk_gating.is_suspended = false;
> -
> -	if (ufshcd_is_clkscaling_supported(hba))
> -		ufshcd_clk_scaling_suspend(hba, false);
> -
>  	/* Enable Auto-Hibernate if configured */
>  	ufshcd_auto_hibern8_enable(hba);
>  
> -	if (hba->dev_info.b_rpm_dev_flush_capable) {
> -		hba->dev_info.b_rpm_dev_flush_capable = false;
> -		cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
> -	}
> -
> -	ufshcd_clear_ua_wluns(hba);
> -
>  	/* Schedule clock gating in case of no access to UFS device yet */
>  	ufshcd_release(hba);
>  
>  	goto out;
>  
> -set_old_link_state:
> -	ufshcd_link_state_transition(hba, old_link_state, 0);
>  vendor_suspend:
>  	ufshcd_vops_suspend(hba, pm_op);
>  disable_irq_and_vops_clks:
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index ee61f82..7662387 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -72,6 +72,8 @@ enum ufs_event_type {
>  	UFS_EVT_LINK_STARTUP_FAIL,
>  	UFS_EVT_RESUME_ERR,
>  	UFS_EVT_SUSPEND_ERR,
> +	UFS_EVT_WL_SUSP_ERR,
> +	UFS_EVT_WL_RES_ERR,
>  
>  	/* abnormal events */
>  	UFS_EVT_DEV_RESET,
> @@ -841,6 +843,8 @@ struct ufs_hba {
>  #ifdef CONFIG_DEBUG_FS
>  	struct dentry *debugfs_root;
>  #endif
> +	bool init_done;
> +	u32 luns_avail;
>  };
>  
>  /* Returns true if clocks can be gated. Otherwise false */
> diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
> index e151477..d9d233b 100644
> --- a/include/trace/events/ufs.h
> +++ b/include/trace/events/ufs.h
> @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
>  		      int dev_state, int link_state),
>  	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>  
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend,
> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
> +		      int dev_state, int link_state),
> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume,
> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
> +		      int dev_state, int link_state),
> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend,
> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
> +		      int dev_state, int link_state),
> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
> +	     TP_PROTO(const char *dev_name, int err, s64 usecs,
> +		      int dev_state, int link_state),
> +	     TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
>  TRACE_EVENT(ufshcd_command,
>  	TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
>  		 unsigned int tag, u32 doorbell, int transfer_len, u32 intr,
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux