[PATCH 0/3] Add support for secure regions in Qcom NANDc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So this series adds a property for declaring such secure regions in DT
so that the driver can skip touching them. While at it, the DT binding
is also converted to YAML format.

Thanks,
Mani

Manivannan Sadhasivam (3):
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  dt-bindings: mtd: Add a property to declare secure regions in Qcom
    NANDc
  mtd: rawnand: qcom: Add support for secure regions in NAND memory

 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 203 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 ------------
 drivers/mtd/nand/raw/qcom_nandc.c             |  72 ++++++-
 3 files changed, 266 insertions(+), 151 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux