Downstream kernel executes a bunch of commands, such as keeping
GPU/MMSS interface clocks alive to make sure all subsystems can
work properly. Add these to make sure they do.
Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/gcc-sdm660.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-sdm660.c b/drivers/clk/qcom/gcc-sdm660.c
index bc8dfcd6d629..db2185c88b77 100644
--- a/drivers/clk/qcom/gcc-sdm660.c
+++ b/drivers/clk/qcom/gcc-sdm660.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
@@ -2622,7 +2623,27 @@ static int gcc_sdm660_probe(struct platform_device *pdev)
if (ret)
return ret;
- return qcom_cc_really_probe(pdev, &gcc_sdm660_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sdm660_desc, regmap);
+ if (ret)
+ return ret;
+
+ /* Disable the GPLL0 active input to MMSS and GPU via MISC registers */
+ regmap_update_bits(regmap, 0x0902c, 0x3, 0x3);
+ regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
+
+ /* This clock is used for all MMSSCC register access */
+ clk_prepare_enable(gcc_mmss_noc_cfg_ahb_clk.clkr.hw.clk);
+
+ /* This clock is used for all GPUCC register access */
+ clk_prepare_enable(gcc_gpu_cfg_ahb_clk.clkr.hw.clk);
+
+ /* Keep bimc gfx clock port on all the time */
+ clk_prepare_enable(gcc_bimc_gfx_clk.clkr.hw.clk);
+
+ /* Set the HMSS_GPLL0_SRC for 300MHz to CPU subsystem */
+ clk_set_rate(hmss_gpll0_clk_src.clkr.hw.clk, 300000000);
+
+ return ret;
}
static struct platform_driver gcc_sdm660_driver = {
--
2.30.1
