Quoting Kuogee Hsieh (2021-02-17 08:58:42)
> Add hbr3_hbr2 voltage and pre-emphasis swing table to support
> HBR3 link rate
>
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dp/dp_panel.c | 4 ----
> drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++--
This spans to subsystems so at least you should run get_maintainers and
include phy maintainers. Maybe it should be split into two patches too
so it can go via different trees.
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 9cc8166..63112fa 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -76,10 +76,6 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> if (link_info->num_lanes > dp_panel->max_dp_lanes)
> link_info->num_lanes = dp_panel->max_dp_lanes;
>
> - /* Limit support upto HBR2 until HBR3 support is added */
> - if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
> - link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
> -
> DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 0939a9e..cc5ef59 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2965,6 +2965,21 @@ static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> }
>
> +
> +static u8 const qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
Should be static const u8 qmp_dp...
> + {0x00, 0x0C, 0x15, 0x1A},
> + {0x02, 0x0E, 0x16, 0xFF},
> + {0x02, 0x11, 0xFF, 0xFF},
> + {0x04, 0xFF, 0xFF, 0xFF}
> +};
> +
> +static u8 const qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
Same.
> + {0x02, 0x12, 0x16, 0x1A},
Please add a space after { and before } and use lowercase hex to match
the qmp_dp_v3_pre_emphasis_hbr_rbr design.
> + {0x09, 0x19, 0x1F, 0xFF},
> + {0x10, 0x1F, 0xFF, 0xFF},
> + {0x1F, 0xFF, 0xFF, 0xFF}
> +};
> +
> static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> { 0x00, 0x0c, 0x14, 0x19 },
> { 0x00, 0x0b, 0x12, 0xff },
> @@ -3000,8 +3015,13 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> drvr_en = 0x10;
> }
>
> - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
