DCC(Data Capture and Compare) is a DMA engine designed for debugging purposes.In case of a system crash or manual software triggers by the user the DCC hardware stores the value at the register addresses which can be used for debugging purposes.The DCC driver provides the user with sysfs interface to configure the register addresses.The options that the DCC hardware provides include reading from registers,writing to registers,first reading and then writing to registers and looping through the values of the same register. In certain cases a register write needs to be executed for accessing the rest of the registers,also the user might want to recaord the changing values of a particular register with time for which he has the option to use the loop feature. The options mentioned above are exposed to the user by sysfs files once the driver is probed.The details and usage of this sysfs files are documented in Documentation/ABI/testing/sysfs-driver-dcc. As an example if a user wants to configure to store 100 words starting from address 0x80000050 he should give inputs as following to the sysfs config file:- echo 0x80000050 100 > /sys/bus/platform/devices/.../config Similarly if he wants to write to a register using DCC hardware he should give following input to config_write sysfs file:- echo 0x80000000 0xFF > /sys/bus/platform/devices/10a2000.dcc/config_write This will write the value 0xFF on address 0x80000000. All this read and write occurs at crash time or if the user manually invokes a software trigger. Souradeep Chowdhury (6): dt-bindings: Added the yaml bindings for DCC arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC) soc: qcom: dcc:Add the sysfs variables to the Data Capture and Compare driver(DCC) DCC:Added the sysfs entries for DCC(Data Capture and Compare) driver MAINTAINERS:Added the entry for DCC(Data Capture and Compare) driver support Documentation/ABI/testing/sysfs-driver-dcc | 74 + .../devicetree/bindings/arm/msm/qcom,dcc.yaml | 49 + MAINTAINERS | 8 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 7 + drivers/soc/qcom/Kconfig | 8 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/dcc.c | 1574 ++++++++++++++++++++ 7 files changed, 1721 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-dcc create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml create mode 100644 drivers/soc/qcom/dcc.c -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation