From: Jack Pham <jackp@xxxxxxxxxxxxxx>
Add device nodes for the two instances each of USB3 controllers,
QMP SS PHYs and SNPS HS PHYs.
Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>
Message-Id: <20210116013802.1609-2-jackp@xxxxxxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 179 +++++++++++++++++++++++++++
1 file changed, 179 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e3597e2a22ab..e51d9ca0210c 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -592,6 +592,185 @@ rpmhcc: clock-controller {
};
};
+
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8350-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e3000 0 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc 20>;
+ };
+
+ usb_2_hsphy: phy@88e4000 {
+ compatible = "qcom,sm8250-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc 21>;
+ };
+
+ usb_1_qmpphy: phy-wrapper@88e9000 {
+ compatible = "qcom,sm8350-qmp-usb3-phy";
+ reg = <0 0x088e9000 0 0x200>,
+ <0 0x088e8000 0 0x20>;
+ reg-names = "reg-base", "dp_com";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc 187>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc 189>;
+ clock-names = "aux", "ref_clk_src", "com_aux";
+
+ resets = <&gcc 28>,
+ <&gcc 30>;
+ reset-names = "phy", "common";
+
+ usb_1_ssphy: phy@88e9200 {
+ reg = <0 0x088e9200 0 0x200>,
+ <0 0x088e9400 0 0x200>,
+ <0 0x088e9c00 0 0x400>,
+ <0 0x088e9600 0 0x200>,
+ <0 0x088e9800 0 0x200>,
+ <0 0x088e9a00 0 0x100>;
+ #phy-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&gcc 190>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+ usb_2_qmpphy: phy-wrapper@88eb000 {
+ compatible = "qcom,sm8350-qmp-usb3-uni-phy";
+ reg = <0 0x088eb000 0 0x200>;
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc 193>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc 192>,
+ <&gcc 195>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc 33>,
+ <&gcc 31>;
+ reset-names = "phy", "common";
+
+ usb_2_ssphy: phy@88ebe00 {
+ reg = <0 0x088ebe00 0 0x200>,
+ <0 0x088ec000 0 0x200>,
+ <0 0x088eb200 0 0x1100>;
+ #phy-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&gcc 196>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc 23>,
+ <&gcc 173>,
+ <&gcc 18>,
+ <&gcc 176>,
+ <&gcc 179>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc 176>,
+ <&gcc 173>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "dm_hs_phy_irq", "ss_phy_irq";
+
+ power-domains = <&gcc 4>;
+
+ resets = <&gcc 26>;
+
+ usb_1_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_2: usb@a8f8800 {
+ compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc 24>,
+ <&gcc 180>,
+ <&gcc 19>,
+ <&gcc 183>,
+ <&gcc 186>,
+ <&gcc 192>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep", "xo";
+
+ assigned-clocks = <&gcc 183>,
+ <&gcc 180>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "dm_hs_phy_irq", "ss_phy_irq";
+
+ power-domains = <&gcc 5>;
+
+ resets = <&gcc 27>;
+
+ usb_2_dwc3: dwc3@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xcd00>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x20 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
};
timer {
--
2.26.2
