From: Gustave Monce <gustave.monce@xxxxxxxxxxx>
Octagon devices use PN544 connected over I2C. Configure it.
Signed-off-by: Gustave Monce <gustave.monce@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 80e4ed48a1e3..e01c9dce187c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -300,6 +300,22 @@ rmi4-f12@12 {
};
};
+&blsp1_i2c6 {
+ status = "okay";
+
+ pn547: pn547@28 {
+ compatible = "nxp,pn544-i2c";
+
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
--
2.30.0
