FAN53526 and SI470X are both connected over blsp2_i2c5. Configure them.
Signed-off-by: Gustave Monce <gustave.monce@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 097f8f6701e3..80e4ed48a1e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -304,6 +304,32 @@ &blsp1_uart2 {
status = "okay";
};
+&blsp2_i2c5 {
+ status = "okay";
+
+ fm_radio: si4705@11 {
+ compatible = "silabs,si470x";
+ reg = <0x11>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_lpddr_1p1: fan53526a@6c {
+ compatible = "fcs,fan53526";
+ reg = <0x6c>;
+
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vph_pwr>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on; /* Turning off DDR power doesn't sound good. */
+ };
+
+ /* ANX7816 HDMI bridge (needs MDSS HDMI) */
+};
+
&blsp2_spi4 {
status = "okay";
--
2.30.0
