Re: [PATCH v2 3/5] pcie-qcom: provide a way to power up qca6390 chip on RB5 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/01/2021 22:26, Rob Herring wrote:
On Thu, Jan 28, 2021 at 11:52 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:

Some Qualcomm platforms require to power up an external device before
probing the PCI bus. E.g. on RB5 platform the QCA6390 WiFi/BT chip needs
to be powered up before PCIe0 bus is probed. Add a quirk to the
respective PCIe root bridge to attach to the power domain if one is
required, so that the QCA chip is started before scanning the PCIe bus.

This is solving a generic problem in a specific driver. It needs to be
solved for any PCI host and any device.

Ack. I see your point here.

As this would require porting code from powerpc/spark of-pci code and changing pcie port driver to apply power supply before bus probing happens, I'd also ask for the comments from PCI maintainers. Will that solution be acceptable to you?



Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom.c | 21 +++++++++++++++++++++
  1 file changed, 21 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index ab21aa01c95d..eb73c8540d4d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -20,6 +20,7 @@
  #include <linux/of_device.h>
  #include <linux/of_gpio.h>
  #include <linux/pci.h>
+#include <linux/pm_domain.h>
  #include <linux/pm_runtime.h>
  #include <linux/platform_device.h>
  #include <linux/phy/phy.h>
@@ -1568,6 +1569,26 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);

+static void qcom_fixup_power(struct pci_dev *dev)
+{
+       int ret;
+       struct pcie_port *pp = dev->bus->sysdata;
+       struct dw_pcie *pci;
+
+       if (!pci_is_root_bus(dev->bus))
+               return;
+
+       ret = dev_pm_domain_attach(&dev->dev, true);
+       if (ret < 0 || !dev->dev.pm_domain)
+               return;
+
+       pci = to_dw_pcie_from_pp(pp);
+       dev_info(&dev->dev, "Bus powered up, waiting for link to come up\n");
+
+       dw_pcie_wait_for_link(pci);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x010b, qcom_fixup_power);
+
  static struct platform_driver qcom_pcie_driver = {
         .probe = qcom_pcie_probe,
         .driver = {
--
2.29.2



--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux