Re: [PATCH] watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-01-28 07:03, Stephen Boyd wrote:
Quoting Sai Prakash Ranjan (2021-01-26 07:02:41)
As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1)
of watchdog control register is wakeup interrupt enable bit and
not related to bark interrupt at all, BIT(0) is used for that.
So remove incorrect usage of this bit when supporting bark irq for
pre-timeout notification. Currently with this bit set and bark
interrupt specified, pre-timeout notification and/or watchdog
reset/bite does not occur.

It looks like the QCOM_WDT_ENABLE_IRQ bit is to catch a problem where a
pending irq is unmasked but the watchdog irq isn't handled in time? So
some sort of irq storm?


In sleep mode, this bit is used to enable unmasked irq to wakeup
watchdog timer. The watchdog counter can be brought out of
reset either by writing 1 to WDOG_RESET or setting this BIT(1) to 1.


Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the bark irq is available")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>


Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux