On 2021-01-25 14:14, Baruch Siach wrote:
Hi linux-arm-msm list,
I am trying to boot kernel v5.11-rc4 on the IPQ6018 based CP01 board.
Boot
hangs with these last lines shown on the console:
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
I verified that the psci_set_osi_mode() call after the last print never
returns.
The board is loaded with stock boot image running 32-bit vendor
provided
U-Boot version 2016.01. So I'm loading a 32-bit kernel with the
ipq6018-cp01-c1.dtb file from arm64.
Hi Baruch,
Can you boot the stock kernel from the vendor and share the below
information?
cat /proc/device-tree/tz_version
Thanks,
Kathiravan T.
The only boot image version identification appears to be this:
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00072-IPQ60xxLZB-1
Are there any missing patches I need to make boot succeed?
Thanks,
baruch
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member of Code Aurora Forum, hosted by The Linux Foundation
