Fixes the following W=1 kernel build warning(s): drivers/clk/qcom/gcc-ipq4019.c: In function ‘clk_cpu_div_set_rate’: drivers/clk/qcom/gcc-ipq4019.c:1279:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Andy Gross <agross@xxxxxxxxxx> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx> Cc: Stephen Boyd <sboyd@xxxxxxxxxx> Cc: linux-arm-msm@xxxxxxxxxxxxxxx Cc: linux-clk@xxxxxxxxxxxxxxx Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> --- drivers/clk/qcom/gcc-ipq4019.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c index ef5137fd50f3f..8abad4032de71 100644 --- a/drivers/clk/qcom/gcc-ipq4019.c +++ b/drivers/clk/qcom/gcc-ipq4019.c @@ -1276,16 +1276,15 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate, struct clk_fepll *pll = to_clk_fepll(hw); const struct freq_tbl *f; u32 mask; - int ret; f = qcom_find_freq(pll->freq_tbl, rate); if (!f) return -EINVAL; mask = (BIT(pll->cdiv.width) - 1) << pll->cdiv.shift; - ret = regmap_update_bits(pll->cdiv.clkr.regmap, - pll->cdiv.reg, mask, - f->pre_div << pll->cdiv.shift); + regmap_update_bits(pll->cdiv.clkr.regmap, + pll->cdiv.reg, mask, + f->pre_div << pll->cdiv.shift); /* * There is no status bit which can be checked for successful CPU * divider update operation so using delay for the same. -- 2.25.1
