On Mon 25 Jan 04:09 CST 2021, Vinod Koul wrote: > Add the registers for few new registers found in SM8350. Also the UFS > phy used in SM8350 seems to have different offsets than V4 phy, although > it claims it is v4 phy, so add the new offsets with SM8350 tag instead > of V4 tag. > Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> > --- > drivers/phy/qualcomm/phy-qcom-qmp.h | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h > index dff7be5a1cc1..bba1d5e3eb73 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.h > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h > @@ -451,6 +451,7 @@ > #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40 > #define QSERDES_V4_TX_LANE_MODE_1 0x84 > #define QSERDES_V4_TX_LANE_MODE_2 0x88 > +#define QSERDES_V4_TX_LANE_MODE_3 0x8C > #define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c > #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 > #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC > @@ -459,6 +460,13 @@ > #define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8 > #define QSERDES_V4_TX_PI_QEC_CTRL 0x104 > > +/* Only for SM8350 QMP V4 Phy TX offsets different from V4 */ > +#define QSERDES_SM8350_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0x178 > +#define QSERDES_SM8350_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0x17c > +#define QSERDES_SM8350_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x180 > +#define QSERDES_SM8350_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x184 > +#define QSERDES_SM8350_TX_TRAN_DRVR_EMP_EN 0xc0 > + > /* Only for QMP V4 PHY - RX registers */ > #define QSERDES_V4_RX_UCDR_FO_GAIN 0x008 > #define QSERDES_V4_RX_UCDR_SO_GAIN 0x014 > @@ -514,6 +522,24 @@ > #define QSERDES_V4_RX_DCC_CTRL1 0x1bc > #define QSERDES_V4_RX_VTH_CODE 0x1c4 > > +/* Only for SM8350 QMP V4 Phy RX offsets different from V4 */ > +#define QSERDES_SM8350_RX_RX_MODE_00_LOW 0x15c > +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH 0x160 > +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH2 0x164 > +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH3 0x168 > +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH4 0x16c > +#define QSERDES_SM8350_RX_RX_MODE_01_LOW 0x170 > +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH 0x174 > +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH2 0x178 > +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH3 0x17c > +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH4 0x180 > +#define QSERDES_SM8350_RX_RX_MODE_10_LOW 0x184 > +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH 0x188 > +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH2 0x18c > +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH3 0x190 > +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH4 0x194 > +#define QSERDES_SM8350_RX_DCC_CTRL1 0x1a8 > + > /* Only for QMP V4 PHY - UFS PCS registers */ > #define QPHY_V4_PCS_UFS_PHY_START 0x000 > #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004 > @@ -529,6 +555,7 @@ > #define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL 0x124 > #define QPHY_V4_PCS_UFS_LINECFG_DISABLE 0x148 > #define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME 0x150 > +#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL1 0x154 > #define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2 0x158 > #define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND 0x160 > #define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND 0x168 > -- > 2.26.2 >
