Re: [PATCH v4 2/5] clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 17 Jan 22:43 CST 2021, Vinod Koul wrote:

> Trion 5LPE set rate uses code similar to alpha_pll_trion_set_rate() but
> with different registers. Modularize these by moving out latch and latch
> ack bits so that we can reuse the function.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  drivers/clk/qcom/clk-alpha-pll.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index f7721088494c..a30ea7b09224 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1471,8 +1471,8 @@ static int alpha_pll_lucid_prepare(struct clk_hw *hw)
>  	return __alpha_pll_trion_prepare(hw, LUCID_PCAL_DONE);
>  }
>  
> -static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
> -				    unsigned long prate)
> +static int __alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
> +				      unsigned long prate, u32 latch_bit, u32 latch_ack)
>  {
>  	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>  	unsigned long rrate;
> @@ -1490,22 +1490,20 @@ static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
>  	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
>  
>  	/* Latch the PLL input */
> -	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> -				 PLL_UPDATE, PLL_UPDATE);
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), latch_bit, latch_bit);
>  	if (ret)
>  		return ret;
>  
>  	/* Wait for 2 reference cycles before checking the ACK bit. */
>  	udelay(1);
>  	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
> -	if (!(val & ALPHA_PLL_ACK_LATCH)) {
> +	if (!(val & latch_ack)) {
>  		pr_err("Lucid PLL latch failed. Output may be unstable!\n");
>  		return -EINVAL;
>  	}
>  
>  	/* Return the latch input to 0 */
> -	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
> -				 PLL_UPDATE, 0);
> +	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), latch_bit, 0);
>  	if (ret)
>  		return ret;
>  
> @@ -1520,6 +1518,12 @@ static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
>  	return 0;
>  }
>  
> +static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,
> +				    unsigned long prate)
> +{
> +	return __alpha_pll_trion_set_rate(hw, rate, prate, PLL_UPDATE, ALPHA_PLL_ACK_LATCH);
> +}
> +
>  const struct clk_ops clk_alpha_pll_trion_ops = {
>  	.prepare = alpha_pll_trion_prepare,
>  	.enable = clk_trion_pll_enable,
> -- 
> 2.26.2
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux