** ** NOTE: To "view the full picture", please look at the following ** patch series: ** https://patchwork.kernel.org/project/linux-arm-msm/list/?series=413355 ** This is a subset of that series. ** Changes in v5: - Fixed getting OPP table when not yet installed by the caller of power domain attachment Changes in v4: - Huge patch series has been split for better reviewability, as suggested by Bjorn Changes in v3: - Fixed YAML doc issues - Removed unused variables and redundant if branch Changes in v2: - Implemented dynamic Memory Accelerator corners support, needed by MSM8998 - Added MSM8998 Silver/Gold parameters This commit introduces a new driver, based on the one for cpr v1, to enable support for the newer Qualcomm Core Power Reduction hardware, known downstream as CPR3, CPR4 and CPRh, and support for MSM8998 and SDM630 CPU power reduction. In these new versions of the hardware, support for various new features was introduced, including voltage reduction for the GPU, security hardening and a new way of controlling CPU DVFS, consisting in internal communication between microcontrollers, specifically the CPR-Hardened and the Operating State Manager. The CPR v3, v4 and CPRh are present in a broad range of SoCs, from the mid-range to the high end ones including, but not limited to, MSM8953/8996/8998, SDM630/636/660/845. Tested on the following smartphones: - Sony Xperia XA2 (SDM630) - Sony Xperia XA2 Ultra (SDM630) - Sony Xperia 10 (SDM630) - Sony Xperia XZ Premium (MSM8998) - F(x)Tec Pro 1 (MSM8998) AngeloGioacchino Del Regno (3): soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver .../bindings/soc/qcom/qcom,cpr3.yaml | 241 ++ MAINTAINERS | 6 + drivers/soc/qcom/Kconfig | 17 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/cpr-common.c | 35 +- drivers/soc/qcom/cpr-common.h | 4 + drivers/soc/qcom/cpr3.c | 2915 +++++++++++++++++ 7 files changed, 3213 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml create mode 100644 drivers/soc/qcom/cpr3.c -- 2.30.0
