[PATCH v3 4/7] dt-bindings: regulator: qcom-labibb: Document soft start properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document properties to configure soft start and discharge resistor
for LAB and IBB respectively.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 .../bindings/regulator/qcom-labibb-regulator.yaml      | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 53853ec20fe2..7a507692f1ba 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -22,6 +22,11 @@ properties:
     type: object
 
     properties:
+      qcom,soft-start-us:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Regulator soft start time in microseconds.
+        enum: [200, 400, 600, 800]
+        default: 200
 
       interrupts:
         maxItems: 1
@@ -35,6 +40,11 @@ properties:
     type: object
 
     properties:
+      qcom,discharge-resistor-kohms:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Discharge resistor value in KiloOhms.
+        enum: [300, 64, 32, 16]
+        default: 300
 
       interrupts:
         maxItems: 1
-- 
2.29.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux