On Wed, 13 Jan 2021 20:42:07 +0100, AngeloGioacchino Del Regno wrote: > Okay, the title may be a little "aggressive"? However, the qcom-labibb > driver wasn't really .. doing much. > The current form of this driver is only taking care of enabling or > disabling the regulators, which is pretty useless if they were not > pre-set from the bootloader, which sets them only if continuous > splash is enabled. > Moreover, some bootloaders are setting a higher voltage and/or a higher > current limit compared to what's actually required by the attached > hardware (which is, in 99.9% of the cases, a display) and this produces > a higher power consumption, higher heat output and a risk of actually > burning the display if kept up for a very long time: for example, this > is true on at least some Sony Xperia MSM8998 (Yoshino platform) and > especially on some Sony Xperia SDM845 (Tama platform) smartphones. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [1/7] regulator: qcom-labibb: Implement voltage selector ops commit: dd582369c6c1f39ec475af6191a934f3e57fda35 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
