Re: [PATCH v2] usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 14 Jan 21:50 CST 2021, Shawn Guo wrote:

> For sdm845 ACPI boot, the URS (USB Role Switch) node in ACPI DSDT table
> holds the memory resource, while interrupt resources reside in the child
> nodes USB0 and UFN0.  It adds USB0 host support by probing URS node,
> creating platform device for USB0 node, and then retrieve interrupt
> resources from USB0 platform device.
> 

This looks reasonable, thanks for updating the search.

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
> Changes for v2:
> - Instead of assuming that USB0 is always the first child of URS0, find
>   the child using node name.
> 
>  drivers/usb/dwc3/dwc3-qcom.c | 59 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 56 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index c703d552bbcf..d803ee98c628 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -60,12 +60,14 @@ struct dwc3_acpi_pdata {
>  	int			dp_hs_phy_irq_index;
>  	int			dm_hs_phy_irq_index;
>  	int			ss_phy_irq_index;
> +	bool			is_urs;
>  };
>  
>  struct dwc3_qcom {
>  	struct device		*dev;
>  	void __iomem		*qscratch_base;
>  	struct platform_device	*dwc3;
> +	struct platform_device	*urs_usb;
>  	struct clk		**clks;
>  	int			num_clocks;
>  	struct reset_control	*resets;
> @@ -429,13 +431,15 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
>  static int dwc3_qcom_get_irq(struct platform_device *pdev,
>  			     const char *name, int num)
>  {
> +	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> +	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
>  	struct device_node *np = pdev->dev.of_node;
>  	int ret;
>  
>  	if (np)
> -		ret = platform_get_irq_byname(pdev, name);
> +		ret = platform_get_irq_byname(pdev_irq, name);
>  	else
> -		ret = platform_get_irq(pdev, num);
> +		ret = platform_get_irq(pdev_irq, num);
>  
>  	return ret;
>  }
> @@ -568,6 +572,8 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
>  	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
>  	struct device		*dev = &pdev->dev;
>  	struct resource		*res, *child_res = NULL;
> +	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
> +							    pdev;
>  	int			irq;
>  	int			ret;
>  
> @@ -597,7 +603,7 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
>  	child_res[0].end = child_res[0].start +
>  		qcom->acpi_pdata->dwc3_core_base_size;
>  
> -	irq = platform_get_irq(pdev, 0);
> +	irq = platform_get_irq(pdev_irq, 0);
>  	child_res[1].flags = IORESOURCE_IRQ;
>  	child_res[1].start = child_res[1].end = irq;
>  
> @@ -651,6 +657,33 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static struct platform_device *
> +dwc3_qcom_create_urs_usb_platdev(struct device *dev)
> +{
> +	struct fwnode_handle *fwh;
> +	struct acpi_device *adev;
> +	char name[8];
> +	int ret;
> +	int id;
> +
> +	/* Figure out device id */
> +	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
> +	if (!ret)
> +		return NULL;
> +
> +	/* Find the child using name */
> +	snprintf(name, sizeof(name), "USB%d", id);
> +	fwh = fwnode_get_named_child_node(dev->fwnode, name);
> +	if (!fwh)
> +		return NULL;
> +
> +	adev = to_acpi_device_node(fwh);
> +	if (!adev)
> +		return NULL;
> +
> +	return acpi_create_platform_device(adev, NULL);
> +}
> +
>  static int dwc3_qcom_probe(struct platform_device *pdev)
>  {
>  	struct device_node	*np = pdev->dev.of_node;
> @@ -715,6 +748,14 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>  			qcom->acpi_pdata->qscratch_base_offset;
>  		parent_res->end = parent_res->start +
>  			qcom->acpi_pdata->qscratch_base_size;
> +
> +		if (qcom->acpi_pdata->is_urs) {
> +			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
> +			if (!qcom->urs_usb) {
> +				dev_err(dev, "failed to create URS USB platdev\n");
> +				return -ENODEV;
> +			}
> +		}
>  	}
>  
>  	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
> @@ -877,8 +918,20 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
>  	.ss_phy_irq_index = 2
>  };
>  
> +static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
> +	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
> +	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
> +	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
> +	.hs_phy_irq_index = 1,
> +	.dp_hs_phy_irq_index = 4,
> +	.dm_hs_phy_irq_index = 3,
> +	.ss_phy_irq_index = 2,
> +	.is_urs = true,
> +};
> +
>  static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
>  	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
> +	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux