This patch series brings some fixes to the Qualcomm DPU driver, aim is to get it prepared for "legacy" SoCs (like MSM8998, SDM630/660) and to finally get command-mode displays working on this driver. The series was tested against MSM8998 (the commit that introduces it to the hw-catalog is not included in this series, as it needs to be cleaned up a little more) and specifically on: - Sony Xperia XZ Premium (MSM8998), 4K dual-dsi LCD display, command-mode - F(x)Tec Pro1 (MSM8998), single-dsi OLED display, video-mode ... And it obviously worked just perfect! Changes in v2: - Dropped patches "drm/msm/dpu: Add a function to retrieve the current CTL status" and "drm/msm/dpu: Fix timeout issues on command mode panels" as the second patch was wrong. - Fixed patch apply issues on latest linux-next and 5.11-rcX AngeloGioacchino Del Regno (7): drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro drm/msm/dpu: Disable autorefresh in command mode drm/msm/dpu: Correctly configure vsync tearcheck for command mode drm/msm/dpu: Remove unused call in wait_for_commit_done .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 90 +++++++++++++++---- .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 49 +++++----- .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c | 26 ++++++ .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h | 14 +++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c | 9 +- 5 files changed, 147 insertions(+), 41 deletions(-) -- 2.29.2
