Re: [PATCH 4/7] dt-bindings: regulator: qcom-labibb: Document soft start properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 10/01/21 18:18, Rob Herring ha scritto:
On Sat, 09 Jan 2021 14:29:18 +0100, AngeloGioacchino Del Regno wrote:
Document properties to configure soft start and discharge resistor
for LAB and IBB respectively.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
  .../bindings/regulator/qcom-labibb-regulator.yaml         | 8 ++++++++
  1 file changed, 8 insertions(+)


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: properties:ibb:properties:qcom,discharge-resistor-kohms: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
	Additional properties are not allowed ('default', 'enum' were unexpected)
	Additional properties are not allowed ('default' was unexpected)
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: properties:ibb:properties:qcom,discharge-resistor-kohms: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
	300 is not of type 'string'
	64 is not of type 'string'
	32 is not of type 'string'
	16 is not of type 'string'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: ignoring, error in schema: properties: ibb: properties: qcom,discharge-resistor-kohms
warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

See https://patchwork.ozlabs.org/patch/1424112

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Fixing ASAP.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux