DRM_DEV_ERROR should be used across this entire source: convert the pr_err prints to the first as a cleanup. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c index df3e4584dfd7..f1091c023836 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c @@ -342,6 +342,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll) { + struct device *dev = &pll->pdev->dev; int rc; u32 status = 0; u32 const delay_us = 100; @@ -354,8 +355,8 @@ static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll) delay_us, timeout_us); if (rc) - pr_err("DSI PLL(%d) lock failed, status=0x%08x\n", - pll->id, status); + DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n", + pll->id, status); return rc; } @@ -402,6 +403,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) { struct msm_dsi_pll *pll = hw_clk_to_pll(hw); struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct device *dev = &pll_10nm->pdev->dev; int rc; dsi_pll_enable_pll_bias(pll_10nm); @@ -410,7 +412,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0); if (rc) { - pr_err("vco_set_rate failed, rc=%d\n", rc); + DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc); return rc; } @@ -427,7 +429,7 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) /* Check for PLL lock */ rc = dsi_pll_10nm_lock_status(pll_10nm); if (rc) { - pr_err("PLL(%d) lock failed\n", pll_10nm->id); + DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id); goto error; } -- 2.29.2