Hi Rob,
Thank you for the patch.
The subject line doesn't match the patch.
On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote:
> Add regulators and camss DT node.
>
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index a943b3f353ce..7bad0515345e 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 {
> regulator-max-microvolt = <1028000>;
> };
>
> + vdda_mipi_csi0_0p9:
> + vdda_mipi_csi1_0p9:
> + vdda_mipi_csi2_0p9:
No need for new labels, you can simply use vreg_l1a_0p875 below.
> vreg_l1a_0p875: ldo1 {
> regulator-min-microvolt = <880000>;
> regulator-max-microvolt = <880000>;
> @@ -1106,6 +1109,15 @@ &cci {
> status = "okay";
> };
>
> +&camss {
> + vdda-csi0-supply = <&vdda_mipi_csi0_0p9>;
> + vdda-csi1-supply = <&vdda_mipi_csi1_0p9>;
> + vdda-csi2-supply = <&vdda_mipi_csi2_0p9>;
> +
> + status = "disabled";
This isn't needed.
> +
Extra blank line.
> +};
> +
> &cci_i2c0 {
> camera@10 {
> compatible = "ovti,ov8856";
--
Regards,
Laurent Pinchart
