Re: [PATCH v5 2/2] scsi: ufs-qcom: Fix ufs RST_n specs violation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-01-08 15:28, Ziqi Chen wrote:
As per specs, e.g, JESD220E chapter 7.2, while powering
off/on the ufs device, RST_n signal should be between
VSS(Ground) and VCCQ/VCCQ2.

Signed-off-by: Ziqi Chen <ziqichen@xxxxxxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 2206b1e..d8b896c 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -582,6 +582,10 @@ static int ufs_qcom_suspend(struct ufs_hba *hba,
enum ufs_pm_op pm_op)
 		ufs_qcom_disable_lane_clks(host);
 		phy_power_off(phy);

+		/* reset the connected UFS device during power down */
+		if (host->device_reset)
+			gpiod_set_value_cansleep(host->device_reset, 1);
+

Instead of calling gpiod_set_value(1/0) directly,
can we have a wrapper func for it?

Thanks,
Can Guo.

 	} else if (!ufs_qcom_is_link_active(hba)) {
 		ufs_qcom_disable_lane_clks(host);
 	}



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux