Re: [PATCH 2/3] soc: qcom: mdt_loader: Handle split bins correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 06 Jan 15:23 CST 2021, Siddharth Gupta wrote:

> It may be that the offset of the first program header lies inside the mdt's
> filesize, in this case the loader would incorrectly assume that the bins
> were not split. The loading would then continue on to fail for split bins.
> This change updates the logic used by the mdt loader to understand whether
> the firmware images are split or not. It figures this out by checking if
> each program header's segment lies within the file or not.
> 
> Signed-off-by: Siddharth Gupta <sidgup@xxxxxxxxxxxxxx>
> ---
>  drivers/soc/qcom/mdt_loader.c | 60 +++++++++++++++++++++++++++----------------
>  1 file changed, 38 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
> index 813216d..c9bbd8c 100644
> --- a/drivers/soc/qcom/mdt_loader.c
> +++ b/drivers/soc/qcom/mdt_loader.c
> @@ -31,6 +31,26 @@ static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
>  	return true;
>  }
>  
> +static bool qcom_mdt_bins_are_split(const struct firmware *fw)
> +{
> +	const struct elf32_phdr *phdrs;
> +	const struct elf32_hdr *ehdr;
> +	uint64_t seg_start, seg_end;
> +	int i;
> +
> +	ehdr = (struct elf32_hdr *)fw->data;
> +	phdrs = (struct elf32_phdr *)(ehdr + 1);
> +
> +	for (i = 0; i < ehdr->e_phnum; i++) {
> +		seg_start = phdrs[i].p_offset;
> +		seg_end = phdrs[i].p_offset + phdrs[i].p_filesz;
> +		if (seg_start > fw->size || seg_end > fw->size)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
>  /**
>   * qcom_mdt_get_size() - acquire size of the memory region needed to load mdt
>   * @fw:		firmware object for the mdt file
> @@ -118,7 +138,7 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len)
>  		return ERR_PTR(-ENOMEM);
>  
>  	/* Is the header and hash already packed */
> -	if (ehdr_size + hash_size == fw->size)
> +	if (qcom_mdt_bins_are_split(fw))
>  		hash_offset = phdrs[0].p_filesz;
>  	else
>  		hash_offset = phdrs[hash_index].p_offset;
> @@ -150,6 +170,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
>  	void *metadata;
>  	char *fw_name;
>  	bool relocate = false;
> +	bool is_split;
>  	void *ptr;
>  	int ret = 0;
>  	int i;
> @@ -157,6 +178,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
>  	if (!fw || !mem_region || !mem_phys || !mem_size)
>  		return -EINVAL;
>  
> +	is_split = qcom_mdt_bins_are_split(fw);
>  	ehdr = (struct elf32_hdr *)fw->data;
>  	phdrs = (struct elf32_phdr *)(ehdr + 1);
>  
> @@ -238,28 +260,22 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
>  
>  		ptr = mem_region + offset;
>  
> -		if (phdr->p_filesz && phdr->p_offset < fw->size) {
> -			/* Firmware is large enough to be non-split */
> -			if (phdr->p_offset + phdr->p_filesz > fw->size) {
> -				dev_err(dev,
> -					"failed to load segment %d from truncated file %s\n",
> -					i, firmware);
> -				ret = -EINVAL;
> -				break;
> +		if (phdr->p_filesz) {
> +			if (!is_split) {

In an effort to reduce the diff size and avoid adding another level of
indentation, how about making the conditionals:

		if (is_split && phdr->p_filesz) {
			memcpy();
		} else if (phdr->p_filesz) {
			...
		}

Apart from that I think this patch looks good!

Regards,
Bjorn

> +				/* Firmware is large enough to be non-split */
> +				memcpy(ptr, fw->data + phdr->p_offset, phdr->p_filesz);
> +			} else {
> +				/* Firmware not large enough, load split-out segments */
> +				snprintf(fw_name + fw_name_len - 3, 4, "b%02d", i);
> +				ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
> +								ptr, phdr->p_filesz);
> +				if (ret) {
> +					dev_err(dev, "failed to load %s\n", fw_name);
> +					break;
> +				}
> +
> +				release_firmware(seg_fw);
>  			}
> -
> -			memcpy(ptr, fw->data + phdr->p_offset, phdr->p_filesz);
> -		} else if (phdr->p_filesz) {
> -			/* Firmware not large enough, load split-out segments */
> -			sprintf(fw_name + fw_name_len - 3, "b%02d", i);
> -			ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
> -							ptr, phdr->p_filesz);
> -			if (ret) {
> -				dev_err(dev, "failed to load %s\n", fw_name);
> -				break;
> -			}
> -
> -			release_firmware(seg_fw);
>  		}
>  
>  		if (phdr->p_memsz > phdr->p_filesz)
> -- 
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux