Enable QPIC NAND on SDX55-MTP board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx55-mtp.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 177886e168aa..83b9d784423e 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -50,3 +50,15 @@ &blsp1_uart3 {
&qpic_bam {
status = "ok";
};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
--
2.25.1
