On Tue 05 Jan 06:26 CST 2021, Manivannan Sadhasivam wrote:
> From: Vinod Koul <vkoul@xxxxxxxxxx>
>
> This adds the regulators found on SDX55 MTP.
>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-sdx55-mtp.dts | 179 +++++++++++++++++++++++++++
> 1 file changed, 179 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> index 825cc7d0ba18..61e7d5d4bd48 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
> @@ -6,6 +6,7 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> #include "qcom-sdx55.dtsi"
> #include <arm64/qcom/pm8150b.dtsi>
> #include "qcom-pmx55.dtsi"
> @@ -22,6 +23,184 @@ aliases {
> chosen {
> stdout-path = "serial0:115200n8";
> };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> + vreg_bob_3p3: pmx55-bob {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_bob_3p3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +
> + vreg_s7e_mx_0p752: pmx55-s7e {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s7e_mx_0p752";
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <752000>;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +
> + vreg_vddpx_2: vddpx-2 {
Isn't this the name of the pad on the SoC, i.e. the consumer? Does the
regulator output have a more suitable name?
I don't see any references to this node and you got it "boot-on", what
happens when the regulator core tuns it off? Or this isn't an issue
until we actually try to support sdhci (guessing based on the voltages)?
Regards,
Bjorn
> + compatible = "regulator-gpio";
> + regulator-name = "vreg_vddpx_2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2850000>;
> + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
> + gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
> + states = <1800000 0>, <2850000 1>;
> + startup-delay-us = <200000>;
> + enable-active-high;
> + regulator-boot-on;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +};
> +
> +&apps_rsc {
> + pmx55-rpmh-regulators {
> + compatible = "qcom,pmx55-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-l1-l2-supply = <&vreg_s2e_1p224>;
> + vdd-l3-l9-supply = <&vreg_s3e_0p824>;
> + vdd-l4-l12-supply = <&vreg_s4e_1p904>;
> + vdd-l5-l6-supply = <&vreg_s4e_1p904>;
> + vdd-l7-l8-supply = <&vreg_s3e_0p824>;
> + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
> + vdd-l14-supply = <&vreg_s7e_mx_0p752>;
> + vdd-l15-supply = <&vreg_s2e_1p224>;
> + vdd-l16-supply = <&vreg_s4e_1p904>;
> +
> + vreg_s2e_1p224: smps2 {
> + regulator-min-microvolt = <1280000>;
> + regulator-max-microvolt = <1400000>;
> + };
> +
> + vreg_s3e_0p824: smps3 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + vreg_s4e_1p904: smps4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1960000>;
> + };
> +
> + ldo1 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo2 {
> + regulator-min-microvolt = <1128000>;
> + regulator-max-microvolt = <1128000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo3 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo4 {
> + regulator-min-microvolt = <872000>;
> + regulator-max-microvolt = <872000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo5 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo7 {
> + regulator-min-microvolt = <480000>;
> + regulator-max-microvolt = <900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo8 {
> + regulator-min-microvolt = <480000>;
> + regulator-max-microvolt = <900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo9 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo10 {
> + regulator-min-microvolt = <3088000>;
> + regulator-max-microvolt = <3088000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo11 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <2928000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo12 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo13 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <2928000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo14 {
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo15 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + ldo16 {
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <1904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> + };
> };
>
> &blsp1_uart3 {
> --
> 2.25.1
>
