From: Samuel Pascua <pascua.samuel.14@xxxxxxxxx> Add initial support for the display found on the Samsung Galaxy 5 (klte) phone. This is based on work from Jonathan Marek & Brian Masney. Please note that this patch depends on dt-binding patch in [1] [1] https://lkml.org/lkml/2020/12/30/293 Signed-off-by: Samuel Pascua <pascua.samuel.14@xxxxxxxxx> --- .../boot/dts/qcom-msm8974-samsung-klte.dts | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 1d5e8abdbda79..8b7e95b748e39 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -453,6 +453,16 @@ int { bias-pull-down; }; }; + + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhc_1: sdhci@f9824900 { @@ -705,6 +715,54 @@ opp_table { adreno@fdb00000 { status = "ok"; }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pma8084_l12>; + }; + }; }; &spmi_bus { -- 2.29.2
