Re: [PATCH 5/5] clk: qcom: gcc: Add clock driver for SM8350

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 03-12-20, 18:06, Bjorn Andersson wrote:
> On Thu 03 Dec 01:02 CST 2020, Vinod Koul wrote:
> > diff --git a/drivers/clk/qcom/gcc-sm8350.c b/drivers/clk/qcom/gcc-sm8350.c
> [..]
> > +static int gcc_sm8350_probe(struct platform_device *pdev)
> > +{
> > +	struct regmap *regmap;
> > +	int ret;
> > +
> > +	regmap = qcom_cc_map(pdev, &gcc_sm8350_desc);
> > +	if (IS_ERR(regmap)) {
> > +		dev_err(&pdev->dev, "Failed to map gcc registers\n");
> > +		return PTR_ERR(regmap);
> > +	}
> > +
> > +	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* FORCE_MEM_CORE_ON for ufs phy ice core clocks */
> > +	regmap_update_bits(regmap, gcc_ufs_phy_ice_core_clk.halt_reg, BIT(14), BIT(14));
> > +
> > +	/*
> > +	 * Enable clocks required by the i2c-connected pm8008 regulators. Don't
> > +	 * register them with the clock framework so that client requests are
> > +	 * short-circuited before grabbing the enable/prepare locks. This
> > +	 * prevents deadlocks between the clk/regulator frameworks.
> > +	 *
> > +	 *	gcc_qupv3_wrap_1_m_ahb_clk
> > +	 *	gcc_qupv3_wrap_1_s_ahb_clk
> > +	 *	gcc_qupv3_wrap1_s5_clk
> > +	 */
> 
> Isn't this a workaround inherited from the downstream control of
> regulators from within the clock core? Does this still apply upstream?

Let me check on this bit...

Thanks
-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux