Specify the relative CPU capacity of all SM8250 AP cores.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index bdd9bd303415..7fe71d8ad8d8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -95,6 +95,8 @@ CPU0: cpu@0 {
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -112,6 +114,8 @@ CPU1: cpu@100 {
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -126,6 +130,8 @@ CPU2: cpu@200 {
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -140,6 +146,8 @@ CPU3: cpu@300 {
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -154,6 +162,8 @@ CPU4: cpu@400 {
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <533>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -168,6 +178,8 @@ CPU5: cpu@500 {
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <533>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -183,6 +195,8 @@ CPU6: cpu@600 {
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <533>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
@@ -197,6 +211,8 @@ CPU7: cpu@700 {
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <642>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
#cooling-cells = <2>;
--
2.29.2
