Add primary and tertinary mi2s pinconfs required to get I2S audio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 55 ++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d2ade3ab3389..51cffdae631c 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1884,6 +1884,37 @@
gpio-ranges = <&tlmm 0 0 180>;
wakeup-parent = <&pdc>;
+ pri_mi2s_active: pri-mi2s-active {
+ sclk {
+ pins = "gpio138";
+ function = "mi2s0_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ws {
+ pins = "gpio141";
+ function = "mi2s0_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ data0 {
+ pins = "gpio139";
+ function = "mi2s0_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ data1 {
+ pins = "gpio140";
+ function = "mi2s0_data1";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
+
qup_i2c0_default: qup-i2c0-default {
mux {
pins = "gpio28", "gpio29";
@@ -2480,6 +2511,30 @@
function = "qup18";
};
};
+
+ tert_mi2s_active: tert-mi2s-active {
+ sck {
+ pins = "gpio133";
+ function = "mi2s2_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data0 {
+ pins = "gpio134";
+ function = "mi2s2_data0";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ ws {
+ pins = "gpio135";
+ function = "mi2s2_ws";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
};
apps_smmu: iommu@15000000 {
--
2.21.0
