On 12/11/20 9:40 pm, Eric Biggers wrote:
> From: Eric Biggers <ebiggers@xxxxxxxxxx>
>
> In preparation for adding CQHCI crypto engine (inline encryption)
> support, add the code required to make mmc_core and mmc_block aware of
> inline encryption. Specifically:
>
> - Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers
> will set this if the host and driver support inline encryption.
>
> - Embed a blk_keyslot_manager in struct mmc_host. Drivers will
> initialize this if the host and driver support inline encryption.
> mmc_block registers this keyslot manager with the request_queue of any
> MMC card attached to the host. mmc_core destroys this keyslot manager
> when freeing the mmc_host.
>
> - Make mmc_block copy the crypto keyslot and crypto data unit number
> from struct request to struct mmc_request, so that drivers will have
> access to them.
>
> - If the MMC host is reset, reprogram all the keyslots to ensure that
> the software state stays in sync with the hardware state.
>
> Co-developed-by: Satya Tangirala <satyat@xxxxxxxxxx>
> Signed-off-by: Satya Tangirala <satyat@xxxxxxxxxx>
> Signed-off-by: Eric Biggers <ebiggers@xxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/core/Kconfig | 8 ++++++
> drivers/mmc/core/Makefile | 1 +
> drivers/mmc/core/block.c | 3 +++
> drivers/mmc/core/core.c | 3 +++
> drivers/mmc/core/crypto.c | 54 +++++++++++++++++++++++++++++++++++++++
> drivers/mmc/core/crypto.h | 46 +++++++++++++++++++++++++++++++++
> drivers/mmc/core/host.c | 2 ++
> drivers/mmc/core/queue.c | 3 +++
> include/linux/mmc/core.h | 6 +++++
> include/linux/mmc/host.h | 7 +++++
> 10 files changed, 133 insertions(+)
> create mode 100644 drivers/mmc/core/crypto.c
> create mode 100644 drivers/mmc/core/crypto.h
>
> diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
> index c12fe13e4b147..ae8b69aee6190 100644
> --- a/drivers/mmc/core/Kconfig
> +++ b/drivers/mmc/core/Kconfig
> @@ -81,3 +81,11 @@ config MMC_TEST
> This driver is only of interest to those developing or
> testing a host driver. Most people should say N here.
>
> +config MMC_CRYPTO
> + bool "MMC Crypto Engine Support"
> + depends on BLK_INLINE_ENCRYPTION
> + help
> + Enable Crypto Engine Support in MMC.
> + Enabling this makes it possible for the kernel to use the crypto
> + capabilities of the MMC device (if present) to perform crypto
> + operations on data being transferred to/from the device.
> diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
> index 95ffe008ebdf8..6a907736cd7a5 100644
> --- a/drivers/mmc/core/Makefile
> +++ b/drivers/mmc/core/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
> mmc_block-objs := block.o queue.o
> obj-$(CONFIG_MMC_TEST) += mmc_test.o
> obj-$(CONFIG_SDIO_UART) += sdio_uart.o
> +mmc_core-$(CONFIG_MMC_CRYPTO) += crypto.o
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 8d3df0be0355c..eaf2f10743260 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -51,6 +51,7 @@
> #include "block.h"
> #include "core.h"
> #include "card.h"
> +#include "crypto.h"
> #include "host.h"
> #include "bus.h"
> #include "mmc_ops.h"
> @@ -1247,6 +1248,8 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
>
> memset(brq, 0, sizeof(struct mmc_blk_request));
>
> + mmc_crypto_prepare_req(mqrq);
> +
> brq->mrq.data = &brq->data;
> brq->mrq.tag = req->tag;
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index d42037f0f10d7..275de270232b3 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -37,6 +37,7 @@
>
> #include "core.h"
> #include "card.h"
> +#include "crypto.h"
> #include "bus.h"
> #include "host.h"
> #include "sdio_bus.h"
> @@ -992,6 +993,8 @@ void mmc_set_initial_state(struct mmc_host *host)
> host->ops->hs400_enhanced_strobe(host, &host->ios);
>
> mmc_set_ios(host);
> +
> + mmc_crypto_set_initial_state(host);
> }
>
> /**
> diff --git a/drivers/mmc/core/crypto.c b/drivers/mmc/core/crypto.c
> new file mode 100644
> index 0000000000000..4f47eb4740db0
> --- /dev/null
> +++ b/drivers/mmc/core/crypto.c
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * MMC crypto engine (inline encryption) support
> + *
> + * Copyright 2020 Google LLC
> + */
> +
> +#include <linux/blk-crypto.h>
> +#include <linux/mmc/host.h>
> +
> +#include "core.h"
> +#include "crypto.h"
> +#include "queue.h"
> +
> +void mmc_crypto_set_initial_state(struct mmc_host *host)
> +{
> + /* Reset might clear all keys, so reprogram all the keys. */
> + if (host->caps2 & MMC_CAP2_CRYPTO)
> + blk_ksm_reprogram_all_keys(&host->ksm);
> +}
> +
> +void mmc_crypto_free_host(struct mmc_host *host)
> +{
> + if (host->caps2 & MMC_CAP2_CRYPTO)
> + blk_ksm_destroy(&host->ksm);
> +}
> +
> +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host)
> +{
> + if (host->caps2 & MMC_CAP2_CRYPTO)
> + blk_ksm_register(&host->ksm, q);
> +}
> +EXPORT_SYMBOL_GPL(mmc_crypto_setup_queue);
> +
> +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq)
> +{
> + struct request *req = mmc_queue_req_to_req(mqrq);
> + struct mmc_request *mrq = &mqrq->brq.mrq;
> +
> + if (!req->crypt_keyslot)
> + return;
> +
> + mrq->crypto_enabled = true;
> + mrq->crypto_key_slot = blk_ksm_get_slot_idx(req->crypt_keyslot);
> +
> + /*
> + * For now we assume that all MMC drivers set max_dun_bytes_supported=4,
> + * which is the limit for CQHCI crypto. So all DUNs should be 32-bit.
> + */
> + WARN_ON_ONCE(req->crypt_ctx->bc_dun[0] > U32_MAX);
> +
> + mrq->data_unit_num = req->crypt_ctx->bc_dun[0];
> +}
> +EXPORT_SYMBOL_GPL(mmc_crypto_prepare_req);
> diff --git a/drivers/mmc/core/crypto.h b/drivers/mmc/core/crypto.h
> new file mode 100644
> index 0000000000000..4780639b832f4
> --- /dev/null
> +++ b/drivers/mmc/core/crypto.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * MMC crypto engine (inline encryption) support
> + *
> + * Copyright 2020 Google LLC
> + */
> +
> +#ifndef _MMC_CORE_CRYPTO_H
> +#define _MMC_CORE_CRYPTO_H
> +
> +struct mmc_host;
> +struct mmc_queue_req;
> +struct request_queue;
> +
> +#ifdef CONFIG_MMC_CRYPTO
> +
> +void mmc_crypto_set_initial_state(struct mmc_host *host);
> +
> +void mmc_crypto_free_host(struct mmc_host *host);
> +
> +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host);
> +
> +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq);
> +
> +#else /* CONFIG_MMC_CRYPTO */
> +
> +static inline void mmc_crypto_set_initial_state(struct mmc_host *host)
> +{
> +}
> +
> +static inline void mmc_crypto_free_host(struct mmc_host *host)
> +{
> +}
> +
> +static inline void mmc_crypto_setup_queue(struct request_queue *q,
> + struct mmc_host *host)
> +{
> +}
> +
> +static inline void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq)
> +{
> +}
> +
> +#endif /* !CONFIG_MMC_CRYPTO */
> +
> +#endif /* _MMC_CORE_CRYPTO_H */
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 96b2ca1f1b06d..d962b9ca0e37a 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -25,6 +25,7 @@
> #include <linux/mmc/slot-gpio.h>
>
> #include "core.h"
> +#include "crypto.h"
> #include "host.h"
> #include "slot-gpio.h"
> #include "pwrseq.h"
> @@ -532,6 +533,7 @@ EXPORT_SYMBOL(mmc_remove_host);
> */
> void mmc_free_host(struct mmc_host *host)
> {
> + mmc_crypto_free_host(host);
> mmc_pwrseq_free(host);
> put_device(&host->class_dev);
> }
> diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
> index de7cb0369c308..d96db852bb91a 100644
> --- a/drivers/mmc/core/queue.c
> +++ b/drivers/mmc/core/queue.c
> @@ -19,6 +19,7 @@
> #include "block.h"
> #include "core.h"
> #include "card.h"
> +#include "crypto.h"
> #include "host.h"
>
> #define MMC_DMA_MAP_MERGE_SEGMENTS 512
> @@ -405,6 +406,8 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
> mutex_init(&mq->complete_lock);
>
> init_waitqueue_head(&mq->wait);
> +
> + mmc_crypto_setup_queue(mq->queue, host);
> }
>
> static inline bool mmc_merge_capable(struct mmc_host *host)
> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
> index 29aa507116261..ab19245e99451 100644
> --- a/include/linux/mmc/core.h
> +++ b/include/linux/mmc/core.h
> @@ -162,6 +162,12 @@ struct mmc_request {
> bool cap_cmd_during_tfr;
>
> int tag;
> +
> +#ifdef CONFIG_MMC_CRYPTO
> + bool crypto_enabled;
> + int crypto_key_slot;
> + u32 data_unit_num;
> +#endif
> };
>
> struct mmc_card;
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index c079b932330f2..550460bf1b37c 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -15,6 +15,7 @@
> #include <linux/mmc/card.h>
> #include <linux/mmc/pm.h>
> #include <linux/dma-direction.h>
> +#include <linux/keyslot-manager.h>
>
> struct mmc_ios {
> unsigned int clock; /* clock rate */
> @@ -377,6 +378,7 @@ struct mmc_host {
> #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */
> #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */
> #define MMC_CAP2_MERGE_CAPABLE (1 << 26) /* Host can merge a segment over the segment size */
> +#define MMC_CAP2_CRYPTO (1 << 27) /* Host supports inline encryption */
>
> int fixed_drv_type; /* fixed driver type for non-removable media */
>
> @@ -471,6 +473,11 @@ struct mmc_host {
> bool cqe_enabled;
> bool cqe_on;
>
> + /* Inline encryption support */
> +#ifdef CONFIG_MMC_CRYPTO
> + struct blk_keyslot_manager ksm;
> +#endif
> +
> /* Host Software Queue support */
> bool hsq_enabled;
>
>
