[PATCH] arm64: dts: qcom: c630: Polish i2c-hid devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The numbering of the i2c busses differs from ACPI and a number of typos
was made in the original patch. Further more the irq flags for the
various resources was not correct and i2c3 only has one of the two
client devices active in any one device.

Also label the various devices, for easier comparison with the ACPI
tables.

Fixes: 44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 31 +++++++++++--------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 047ac9c16874..399aef2a0951 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -264,23 +264,28 @@ &i2c3 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	hid@15 {
+	tsel: hid@15 {
 		compatible = "hid-over-i2c";
 		reg = <0x15>;
 		hid-descr-addr = <0x1>;
 
-		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_hid_active>;
 	};
 
-	hid@2c {
+	tsc2: hid@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 
-		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_hid_active>;
+		pinctrl-0 = <&i2c3_hid_active>;
+
+		status = "disabled";
 	};
 };
 
@@ -288,15 +293,15 @@ &i2c5 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	hid@10 {
+	tsc1: hid@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
 
-		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hid_active>;
+		pinctrl-0 = <&i2c5_hid_active>;
 	};
 };
 
@@ -304,7 +309,7 @@ &i2c11 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	hid@5c {
+	ecsh: hid@5c {
 		compatible = "hid-over-i2c";
 		reg = <0x5c>;
 		hid-descr-addr = <0x1>;
@@ -312,7 +317,7 @@ hid@5c {
 		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_hid_active>;
+		pinctrl-0 = <&i2c11_hid_active>;
 	};
 };
 
@@ -426,7 +431,7 @@ codec {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	i2c2_hid_active: i2c2-hid-active {
+	i2c3_hid_active: i2c2-hid-active {
 		pins = <37>;
 		function = "gpio";
 
@@ -435,7 +440,7 @@ i2c2_hid_active: i2c2-hid-active {
 		drive-strength = <2>;
 	};
 
-	i2c6_hid_active: i2c6-hid-active {
+	i2c5_hid_active: i2c5-hid-active {
 		pins = <125>;
 		function = "gpio";
 
@@ -444,7 +449,7 @@ i2c6_hid_active: i2c6-hid-active {
 		drive-strength = <2>;
 	};
 
-	i2c12_hid_active: i2c12-hid-active {
+	i2c11_hid_active: i2c11-hid-active {
 		pins = <92>;
 		function = "gpio";
 
-- 
2.29.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux