Re: [PATCH v1] i2c: qcom: Fix IRQ error misassignement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 26, 2020 at 03:53:21PM +0100, Robert Foss wrote:
> During cci_isr() errors read from register fields belonging to
> i2c master1 are currently assigned to the status field belonging to

s/correctly/incorrectly

> i2c master0. This patch corrects this error, and always assigns
> master1 errors to the status field of master1.
> 

This patch fixes a legitimate bug. So there should be a fixes tag!

> Suggested-by: Loic Poulain <loic.poulain@xxxxxxxxxx>

Reported-by?

Thanks,
Mani

> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-qcom-cci.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
> index f13735beca58..1c259b5188de 100644
> --- a/drivers/i2c/busses/i2c-qcom-cci.c
> +++ b/drivers/i2c/busses/i2c-qcom-cci.c
> @@ -194,9 +194,9 @@ static irqreturn_t cci_isr(int irq, void *dev)
>  	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) {
>  		if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR ||
>  			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR)
> -			cci->master[0].status = -ENXIO;
> +			cci->master[1].status = -ENXIO;
>  		else
> -			cci->master[0].status = -EIO;
> +			cci->master[1].status = -EIO;
>  
>  		writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ);
>  		ret = IRQ_HANDLED;
> -- 
> 2.27.0
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux