The Samsung Galaxy S5 uses a maxim17048 fuelgauge. The maxim,rcomp value
is taken from downstream kernel. Model data and temperature-based
compensation are not yet supported in the mainline driver, but the
readings seem fine nevertheless.
Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
---
.../boot/dts/qcom-msm8974-samsung-klte.dts | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index b0899107f3ced..97352de913142 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -406,6 +406,16 @@ mux {
};
};
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c_touchkey_pins: i2c-touchkey {
mux {
pins = "gpio95", "gpio96";
@@ -666,6 +676,27 @@ max77826_buckboost: BUCKBOOST {
};
};
};
+
+ i2c@f9968000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+ };
};
&spmi_bus {
@@ -703,6 +734,14 @@ wlan_sleep_clk_pin: wlan-sleep-clk-pin {
power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
+
+ fuelgauge_pin: fuelgauge-int-pin {
+ pins = "gpio21";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
};
};
};
base-commit: 6147c83fd749d19a0d3ccc2f64d12138ab010b47
--
2.29.2
