[PATCH 0/2] Add devicetree support for SDX55 Modem and MTP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series adds devicetree support for Qualcomm SDX55 Modem and MTP
board. This series functionally depends on Clock support series [1]
which is under review.

With the current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Mani

[1] https://lore.kernel.org/linux-arm-msm/20201119072714.14460-1-manivannan.sadhasivam@xxxxxxxxxx/

Manivannan Sadhasivam (1):
  ARM: dts: qcom: Add SDX55 Modem and MTP board support

Vinod Koul (1):
  dt-bindings: arm: qcom: Document SDX55 Modem and boards

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/qcom-sdx55-mtp.dts          |  27 +++
 arch/arm/boot/dts/qcom-sdx55.dtsi             | 205 ++++++++++++++++++
 4 files changed, 240 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx55-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx55.dtsi

-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux